My wife just called, and said the the heater blower fan is not working properly. That the 2nd fan setting is no different than the 1st setting. Also, the the 3rd is super loud. Anyone have this before.

You have to replace the resistor deal... it's not hard. There are many hundreds of threads to choose from that will talk you through it.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

step 1 open glove box.
step 2 push tabs on arms of glove box so it releases and falls into your lap.
step 3 unscrew 2 bolts holding on the resistorchip.
step 4 remove resistor.
step 5 repeat everything in reverse.

Now I have been having a night of
but almost positive thats how it goes.
pretty simple and not hard at all good luck.

_________________
Its a Jeep Thing...
IF CAPS LOOK IS ON IM AT WORK DONT WORRY BOUT IT IM NOT YELLING HAHA

2005 RENEGADE 4X4
2.5 RUSTYS LIFT
245/75/16 GOODYEAR MTR'S
FULL TINT
13 MILES TO THE GALLON.....GOD darn HAHA

upgrade part #

Brand: BWD
Part#: RU1040

comes up under chrysler sebring 03ish or something

just give them the part number and watch them fumble around trying to figure out how to deal with someone who actually knows what part they're looking for

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632

Hi,
Please see topic: viewtopic.php?f=3&t=47156&start=20

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

Thanks to all who helped. I replaced the resistor on Thursday. $20 from a local Jeep dealership, and 20 min. of farting around. Man...is that clip lame.

Yep not the best.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

Hi anyone know if its the Borg Warner Ru1045 resistor i need for a 2004 crd liberty?

_________________
2004 2.8 crd Limited

Hi,

Not sure if that part is the correct one, but I got the part form Jeep UK dealer for about £ 20.00 more or less and it's worked very well. Have a look at at Topic tread I posted up it will help you to replace it once you have bought it.

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

Cheers for £20 from dealership i'll go to them , not a bad price .

_________________
2004 2.8 crd Limited