| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| grinding noise... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=61226 |
Page 1 of 1 |
| Author: | NCC-1864 [ Wed Jun 15, 2011 7:35 pm ] |
| Post subject: | grinding noise... |
I have a grinding noise coming from my front driver side wheel when a make a right turn ? driver side wheel bearing has been change a mouth ago by dealer could it be : outer cv joint? low control arm ball joint? tie rod end ? JBA 4.5 A-arm always well greased. sway bar bushing had been change also recently. thanks for your comments. |
|
| Author: | JeepinJarhead03 [ Thu Jun 16, 2011 4:37 am ] |
| Post subject: | Re: grinding noise... |
just for reference, even though the hub was changed a month ago doesn't mean it isn't that same hub depending on the particular make of the part they used when replacing it, the cheapo hubs have been known to last astounding numbers of miles before going kaput again.. like.. 2,000 miles and such |
|
| Author: | NCC-1864 [ Thu Jun 16, 2011 10:37 am ] |
| Post subject: | Re: grinding noise... |
well ,on the bill I have a MOPAR parts number for that hub #V2508352AA I'll be very surprise that it could be the hub again cause prior to the replacement i had a howling sound at 39-50mph coming from the front left and it stop after the replacement. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|