| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Clunk in reverse http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=61346 |
Page 1 of 1 |
| Author: | OSUKJ04 [ Thu Jun 23, 2011 12:22 am ] |
| Post subject: | Clunk in reverse |
Need help diagnosing a problem. When in reverse and turning the wheel to the right I get a loud clunk and pop. This only happens once and only when reversing and turning the wheel to the right. It does feel like the driveline is binding and does not happen when reversing straight back and there are no vibrations or whirring from the driveline. KJ is an 04 3.7L 5 Speed, happens both in neutral and gear so I dont think its a tranny problem. Thanks |
|
| Author: | long_tall_texan [ Thu Jun 23, 2011 9:32 am ] |
| Post subject: | Re: Clunk in reverse |
1. Bad u-joint(s) 2. Bad ball joint of Tie Rod ends 3. Bad Upper Control Arm ball joint 4. Bad Lower Control Arm ball joint 5. Slack in rack-and-pinion Just start checking the list... Could be any of these. |
|
| Author: | OSUKJ04 [ Thu Jun 23, 2011 10:05 pm ] |
| Post subject: | Re: Clunk in reverse |
Appreciate the time.. Will start checking tomorrow |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|