Need help diagnosing a problem. When in reverse and turning the wheel to the right I get a loud clunk and pop. This only happens once and only when reversing and turning the wheel to the right. It does feel like the driveline is binding and does not happen when reversing straight back and there are no vibrations or whirring from the driveline. KJ is an 04 3.7L 5 Speed, happens both in neutral and gear so I dont think its a tranny problem. Thanks

_________________
04 Light Khaki KJ

1. Bad u-joint(s)
2. Bad ball joint of Tie Rod ends
3. Bad Upper Control Arm ball joint
4. Bad Lower Control Arm ball joint
5. Slack in rack-and-pinion

Just start checking the list... Could be any of these.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...

Appreciate the time.. Will start checking tomorrow

_________________
04 Light Khaki KJ