Hey all,

Been a LONG time gone from the forum.

I have a question about the wife's 02 KJ.

For some reason the heater in the cabin will not get hot. I am sure the coolant level is fine and the blower works like a champ. Is there a flow diverter in the heater core that governs the flow of heated coolant through the heater core? and could that be malfunctioning?

Anybody dealt with this before?

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks

Hey i have the same problem on my wife's 05 libby.

I have read that it is usually the blend door actuator that is the problem. I was on here looking for the same answer so i thought i would piggy back on your post. I am looking for a description on how to get into the actuator without taking the dash apart to much if that is possible. Pics are also nice if someone has taken any. Thanks.

Do a search here on "blend door" you should find several posts and one with pictures.

_________________
2002 Export CRD 2.5 Sport