KJ Storage System NEED BLUE PRINTS

2006 KJ · **Posted:** Sun Aug 28, 2011 6:58 pm

soo in the fabrication section Glend had made this incredible storage system... and was at one point selling blue prints / templates. He has since quit selling them due to that run of prints being sold out. Does anyone have these blue prints or templates that they are done with and willing to sell me? I'd reallllllllly love to get my hands on some since this is the only KJ storage system i've ever liked. If this attempt fails i guess i'll just have to do my best from the pictures posted.

here's the link to the storage system i'm talking about

viewtopic.php?f=59&t=45217

picture

again.. this is NOT my storage system.. and it is Glend's work.

Ryn7 · **Posted:** Wed Aug 31, 2011 1:01 am

How hard could it be to design your own?

JeepinJarhead03 · **Posted:** Wed Aug 31, 2011 1:06 am

About as hard as it is to have tact on an internet forum

liquidxit2 · **Posted:** Wed Aug 31, 2011 10:46 am

JeepinJarhead03 wrote:

About as hard as it is to have tact on an internet forum

I see what you did there...

long_tall_texan · **Posted:** Wed Aug 31, 2011 12:10 pm

I have a PDF drawing of a sub box with storage built in that was very similar. PM me your email address and I can send the PDF to you. It at least has the outer envelope dimensions and such that you will need to get started.

Boomerang · **Joined:** Tue Jul 26, 2011 7:46 pm **Posts:** 184

lol...@ above

That's an alright looking storage system. I've been thinking about building my own as well. The one above looks a little bulky for me and would not be beneficial to my needs, but it looks solid.
I'll be parusing around for more ideas

JeepinJarhead03 · **Posted:** Wed Aug 31, 2011 5:48 pm

I like that system.. i'd be afraid someone would put their drawz in it though.. looks better than my dresser...

what I really NEED to do is unload all the friggin parts and **** out of my jeep so that I don't need one

ATXKJ · **Posted:** Wed Aug 31, 2011 8:32 pm

FYI - if you start with the idea - and build model with cardboard and tape
- you'll have a pattern to cut out the wooden version.

long_tall_texan · **Posted:** Wed Aug 31, 2011 8:38 pm

Or if you have access to a 36" or wider plotter, you can print my pdf at 1:1 scale.

JeepinJarhead03 · **Posted:** Wed Aug 31, 2011 10:08 pm

or if you have a whatchamacallit you can just print out the entire thing and put it in the jeep lol

ATXKJ · **Posted:** Thu Sep 01, 2011 7:58 pm

I'd go with 'whatchamacallit' as LTT's 3D printer.....although that might be a bit wide for it.

long_tall_texan · **Posted:** Thu Sep 01, 2011 8:45 pm

I can print it in 8x8x12 chunks!

JeepinJarhead03 · **Posted:** Thu Sep 01, 2011 8:52 pm

Some assembly required

2006 KJ · **Posted:** Thu Sep 01, 2011 9:57 pm

hahahah well that escalated quickly! i was asking if anyone had the plans from the original creator because he sent out detailed instructions and templates for every piece that needed cut out.... but i dont seem to be having much luck so i guess i'll just wing it.

i've never built anything with drawers before. that could be an adventure haha.

2006 KJ · **Posted:** Thu Sep 01, 2011 9:58 pm

long_tall_texan wrote:

Or if you have access to a 36" or wider plotter, you can print my pdf at 1:1 scale.

do you have a picture of the sub box? i dont want to waste your time if it's not something i 'think' i can use. Thanks for the offer!

long_tall_texan · **Posted:** Thu Sep 01, 2011 11:27 pm

Of all the pics I have of my Jeep, that is one pic that I don't have. And I sold the box and opted for a smaller Infinity BassLink. Just PM me your email and I'll be happy to send it to you. It is very similar to the one shown here with the drawers.

KJ Storage System NEED BLUE PRINTS

Who is online