how to disable the seatbelt sound

gtommec · **Posted:** Thu Nov 17, 2011 6:17 pm

Sir Sam wrote:

Find someone with an 05, install your cluster into theirs, disable the chime, then install it into yours.

you sir are a GENIUS!!! I don't know why I didn't think of that before. My Sister in law has an 05 so I will be doing this right away, thanks

Boss · **Posted:** Thu Nov 17, 2011 9:07 pm

Very handy I can't wait to try it tomorrow morning, thank you all
Brian

Sir Sam · **Posted:** Fri Nov 18, 2011 1:51 am

KTM87 wrote:

Pretty much yup cause it dont chime no more

Excellent! That means I can add this to the FAQ and its finally referenced somewhere on the site!

KTM87 · **Posted:** Fri Nov 18, 2011 6:39 pm

Sir Sam wrote:

KTM87 wrote:

Pretty much yup cause it dont chime no more

Excellent! That means I can add this to the FAQ and its finally referenced somewhere on the site!

Do it

gtommec · **Posted:** Thu Dec 01, 2011 8:55 am

^^^^ Umm not only is that SPAM, but it is MY post put through a translator a couple of times and reposted

Sir Sam · **Posted:** Fri Dec 02, 2011 7:51 pm

gtommec wrote:

^^^^ Umm not only is that SPAM, but it is MY post put through a translator a couple of times and reposted

You see that little "report" icon on the right?

2006 KJ · **Posted:** Sun Dec 04, 2011 12:35 am

did mine tonight. but forgot the procedure so i just looked it up in my owners manual. really easy to do. and it's great because now i dont have to buckle to go to the end of my driveway to get the mail when i'm lazy :twisted:

gtommec · **Posted:** Mon Dec 05, 2011 11:16 pm

Sir Sam wrote:

gtommec wrote:

^^^^ Umm not only is that SPAM, but it is MY post put through a translator a couple of times and reposted

You see that little "report" icon on the right?

yes and I reported it, I just thought it was funny that the spammer used my words.

Boss · **Posted:** Thu Dec 15, 2011 8:51 pm

Quote:

...get in, close the door, put the seatbelt on, turn the key to on, wait for the seatbelt light to turn off, then unbuckle and buckle it at least 5 times in 10 seconds, then turn the key to off. It should chime when you turn it off if you do this right.

Bingo

Boss · **Posted:** Thu Dec 15, 2011 8:53 pm

the chime was soooo annoying, we live on mountain property, anyway thanks a million
Brian

Sir Sam · **Posted:** Thu Dec 15, 2011 11:35 pm

Boss wrote:

the chime was soooo annoying, we live on mountain property, anyway thanks a million
Brian

Your welcome!

Tasha121 · **Joined:** Wed Oct 19, 2011 8:16 pm **Posts:** 6

I'll definitely have to try the first suggestion! HA. However, I must confess I would NEVER wear my seat belt if not for that noise!

ha

CRD'syeruncle · **Joined:** Tue Jul 10, 2012 9:31 am **Posts:** 22

Newbie late to this thread, but I will also confirm that in my '05 Limited CRD, the procedure to turn off the seatbelt chime worked as Sir Sam described. To reiterate:

With ignition off buckle up
Turn ignition to on without starting
Wait for seatbelt light to go out
Unbuckle, rebuckle up, x5
Turn ignition off

Upon turning ignition to the off position the vehicle let out a chime, and since then the seatbelt warning chime has been disabled, but the dash light is still present when unbuckled and the vehicle is on. I have not tried the reset, but when I get around to my EGR I will have to disconnect the power. I will let you know if it resets to default. :rockon:

jmnetus · **Posted:** Sat Jul 14, 2012 12:02 pm

I've already had my power disconnected for >1 hr since I disabled my chime, it did not reset it.

ChooChooman74 · **Posted:** Sat Jul 14, 2012 1:18 pm

Great Thread. I DO wear my seatbelt, but when doing stuff like backing the trailer, or moving the vehicle to get it loaded, the beeping is annoying.

fairmont1998 · **Posted:** Sun Jul 15, 2012 3:33 am

Tried this on my 2012 KK and I get the one chime when you turn off the key after doing the procedure, but then when you insert the key again and start it with the belt unbuckled the seatbelt chime starts beeping at you

_benjammin · **Posted:** Sun Jul 15, 2012 11:28 am

It worked for me and my 2012 Arctic.

jhblackwell · **Posted:** Sun Jul 15, 2012 2:21 pm

Again, I must ask. Does the owner's manual not explain this procedure?

Sir Sam · **Posted:** Mon Jul 16, 2012 1:34 am

jhblackwell wrote:

Again, I must ask. Does the owner's manual not explain this procedure?

It does but it was exceedingly difficult to find.

This thread on the other hand is very easy to find.

I'd also like to point out that many many used vehicles do not come with the owners manual. Out of the past 30 or so Jeeps I have bought I have gotten only a single one with the owners manual.

I don't know why people take the owners manual out of their vehicle, but I so rarely get used vehicles with them, this is also very annoying when fuse panel diagrams are posted in the owners manual.

Now might I ask, whats so wrong with this being posted here for people who obviously want to know how to do this to see how to do it? I mean heck, 90% of the content posted here could just reference someone off site, what the heck is the point of having lost unless we are here to share

fairmont1998 · **Posted:** Mon Jul 16, 2012 2:28 am

I must correct my last post!
It has worked on my 2012 KK. I still get the 5 beeps at startup if I'm unbuckled, but if I drive off without putting on my seatbelt, or undo my belt while driving it doesn't beep anymore. Just the dash light illuminates. Happy with that

how to disable the seatbelt sound

Who is online