| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Interior Ventilalation system failing? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=65031 |
Page 1 of 1 |
| Author: | Boomerang [ Fri Feb 03, 2012 4:46 pm ] |
| Post subject: | Interior Ventilalation system failing? |
As of yesterday the number 1 and 2 speed setting for the interior A/C / heat / vent system stopped working. They are not blowing any air. #'s 3 and 4 still work. Anyone had this issue before? What the heck is the problem exactly and how can i fix it? i have an extended warranty, but I tend to fix te cheap small stuff myself to save from having to go to a shop and wait for it to get done. advice? |
|
| Author: | Boomerang [ Fri Feb 03, 2012 4:47 pm ] |
| Post subject: | Re: Interior Ventilalation system failing? |
oh yeah, 2006 3.7 |
|
| Author: | fratichelli [ Fri Feb 03, 2012 4:48 pm ] |
| Post subject: | Re: Interior Ventilalation system failing? |
Look up blower resister, plenty of posts including pictures on here. It is a common problem. |
|
| Author: | Boomerang [ Fri Feb 03, 2012 4:48 pm ] |
| Post subject: | Re: Interior Ventilalation system failing? |
thanks |
|
| Author: | Megalos [ Fri Feb 03, 2012 7:18 pm ] |
| Post subject: | Re: Interior Ventilalation system failing? |
Replaced my blower resistor this fall. Took care of the issue. I went with the one made for the Sending as it seems to be better built. You'll know what I'm talking about once you find the thread. |
|
| Author: | papaindigo [ Sun Feb 05, 2012 12:20 pm ] |
| Post subject: | Re: Interior Ventilalation system failing? |
BWD part number RU1040 or equivalent that is listed for a 2001-2004 Chrysler Sebring. To get to the resistor open the glove box then press inward on the latch arms on the left and right side to let it drop down further. The resistor is right there held on by two 5/16 hex head screws. You need to pull out on the red tab about 1/4" to push the release and it required some pressure to get the red tap to pull out. Per my notes clipped from the KJ CRD forum |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|