LOST JEEPS :: View topic - addtl Fog Lights on 05 Renegade front bumper

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

addtl Fog Lights on 05 Renegade front bumper http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=678	Page 1 of 1

Author:	JAMSKJ [ Sun Jul 24, 2005 7:30 pm ]
Post subject:	addtl Fog Lights on 05 Renegade front bumper
Has anyone added a second set of aftermarket lights to the front bumper of an 05 Renegade? I have the factory 6" 55W Hellas, but want to add my 85W PIAA combo fog/driving lights. Before I go to the effort of removing the front bumper, does anyone know if there is enough metal under there to attach the lights? I was planning to add the PIAA lights just inside of the factory Hella. Have considered removing the Hellas, just using my PIAA. Not sure about how in the existing location... Also, has anyone removed the bumper on 05 Renegade. I found some instructions for 04 sport in tech section. After looking at front bumper, it looks similar to remove, although there seem to be a few extra pieces to consider. Is there anything special about the plastic rivots? Can I find those in a hardware store or do I need to special order? Anyone have ideas or pics Thanks! John

Author:	JAMSKJ [ Mon Aug 15, 2005 1:16 am ]
Post subject:	New lights added to 05 Reny front bumper
I finally found a really easy way to add some additional lights to the front bumper of my 2005 Liberty Renegade. Check out the pics! Factory Hella lights Factory Wiring Harness Wiring Harness wired to new location New lightbar with factory Hella lights in the center, new PIAA lights on each end Installed John L.O.S.T. #000573 http://www.cardomain.com/ride/838929 2005 Liberty Renegade MOPAR offroad package MOPAR roof rack BAUER rear tire bike rack mods: GRACO baby seat (wife's mod!) PIAA driving/fog lights; custom front bumper lightbar mag light seat mount Superflow air compressor (under rear seat) BAUER rear tire bike rack

Author:	KW AV8R [ Mon Aug 15, 2005 1:22 am ]
Post subject:
That looks really good. As I was scrolling down from the top of the page, I was a little sceptical but the final product looks outstanding!

Author:	uvalax236 [ Mon Aug 15, 2005 1:34 am ]
Post subject:
Looks really good but I personally would have done it the other way arround, PIAA's on the inside.

Author:	Sean [ Wed Aug 17, 2005 1:49 pm ]
Post subject:
How did you mount the lightbar on the bumper? Through the two factory mounts for the fogs?

Author:	4wdParakeet [ Thu Aug 18, 2005 1:36 am ]
Post subject:	more lights
I want more details I really like the finished product and it doesn't seem like it would be that difficult to do/manufacture. Please and Thank you Parakeet

Author:	FreedomKJ [ Thu Aug 18, 2005 12:40 pm ]
Post subject:
Looks awesome! It'd be nice to be able to add lights to the bumper withough drilling any holes.

Author:	JAMSKJ [ Sat Aug 20, 2005 12:45 am ]
Post subject:	05 Reny front bumper lightbar
I didnt want to have to drill into the front bumper nor remove any of it to access underneath to secure any bolts! The existing light tabs are strong, work great for my lightbar. Since all of my wire harness connections are at the lights themselves, I can easily remove the lights and bar in a matter of minutes. For anyone who wants more info on my lightbar, post another message with your questions, I will be happy to answer. John L.O.S.T. #000573 http://www.cardomain.com/ride/838929 2005 Liberty Renegade MOPAR offroad package MOPAR roof rack BAUER rear tire bike rack mods: GRACO baby seat (wife's mod!) PIAA driving/fog lights; custom front bumper lightbar mag light seat mount Superflow air compressor (under rear seat) BAUER rear tire bike rack

Author:	Katmandu [ Sat Aug 20, 2005 11:28 am ]
Post subject:	Re: 05 Reny front bumper lightbar
JAMSKJ wrote: For anyone who wants more info on my lightbar, post another message with your questions, I will be happy to answer. How and what did you make the lightbar itself out of ??

Author:	4wdParakeet [ Sat Aug 20, 2005 5:41 pm ]
Post subject:	ditto
Please see last post. Quote: I want more details I really like the finished product and it doesn't seem like it would be that difficult to do/manufacture. Please and Thank you Parakeet

Author:	JAMSKJ [ Fri Sep 23, 2005 6:03 pm ]
Post subject:	more light 05 Rene
I have more close-up photos of the lightbar I had made for mounting additional lights on the front of my 05 Liberty Renegade. Again, no bumper removal required and no drilling. The entire bar mounts using the factory fog bumper mount and screw. Also, really easy to remove if necessary. The lightbar is made from hollow tubular steel (rounded rectangular shaped). This keeps the weight down, but was more than strong enough to hold the lights steady. No bouncing. The additional pics should provide sufficient details to allow you to fab one. PM if you would like me to email you the pics. 4wdParakeet, Katmandu: you asked for more info, send me an email address. I apologize for the very late response. Work demands have kept me busy lately. Kind Regards, John Snyder previous write-up: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=678

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/