Hi all, is there any way of adjusting the door hinges ?

my passenger front door is slightly out of line, and fouls on the keep ... so it has to be slammed to shut properly

the gap between the door and body gets smaller towards the bottom, like it should be pushed/adjusted out at the bottom only !! (its driving me mad now )

_________________
05, 2.8 CRD Sport (6 speed manual)

Go to http://colorado4wheel.com/manuals/Jeep/KJ/ and get a copy of the FSM. In the Body section there are instructions on door adjustment.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Cheers mate, and I'm prob being thick, but it says about adjusting the hinge etc, but dosent really say how to ??

I've just been messing with it, and managed to make it worse, then back to where it was, but not better ... I cant see how the darn thing adjust's

_________________
05, 2.8 CRD Sport (6 speed manual)

Well .. I sorted the door alignment so it shuts fine with no probs now ... BUT ... I had to make some shims to fit under the bottom hinge that bolts to the door to do it WTF's up with that ?

_________________
05, 2.8 CRD Sport (6 speed manual)