Im looking at making a deal on these they were advertised as tj rubicon wheels but I cant quite tell by the picture. Are there any experts that could help me out?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Help please http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=73923 |
Page 1 of 1 |
| Author: | John3:17 [ Sun Jan 27, 2013 4:45 pm ] |
| Post subject: | Help please |
Im looking at making a deal on these they were advertised as tj rubicon wheels but I cant quite tell by the picture. Are there any experts that could help me out?
|
|
| Author: | Ted15 [ Sun Jan 27, 2013 4:48 pm ] |
| Post subject: | Re: Help please |
John3:17 wrote: Im looking at making a deal on these they were advertised as tj rubicon wheels but I cant quite tell by the picture. Are there any experts that could help me out? Are they 16" or 17"? |
|
| Author: | John3:17 [ Sun Jan 27, 2013 4:52 pm ] |
| Post subject: | Re: Help please |
16" |
|
| Author: | Ted15 [ Sun Jan 27, 2013 4:58 pm ] |
| Post subject: | Re: Help please |
I'm no expert but I'm pretty sure that's one of the two styles. The other one doesn't have the step between the spokes, it's smooth. I think there may've been a polished version also. The one without the step seems to be the more desirable of them. |
|
| Author: | John3:17 [ Sun Jan 27, 2013 9:32 pm ] |
| Post subject: | Re: Help please |
What is the backspacing on them? Ive found 3 different ones on the forums |
|
| Author: | Ted15 [ Sun Jan 27, 2013 9:35 pm ] |
| Post subject: | Re: Help please |
Not a clue, sorry. |
|
| Author: | Tony P. [ Sun Jan 27, 2013 10:00 pm ] |
| Post subject: | Re: Help please |
viewtopic.php?f=5&t=72363 Need to find out what the bolt pattern is. If the bolt patteren is 4.5 on 5, and have the chrysler emblem, and part number stamped on the back side of the rim, their tj Moabs 16x8 (step side). 5" of backspace. They also exist (smooth side). Hope this helps. |
|
| Author: | John3:17 [ Sun Jan 27, 2013 11:17 pm ] |
| Post subject: | Re: Help please |
Tony P. wrote: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=72363 Need to find out what the bolt pattern is. If the bolt patteren is 4.5 on 5, and have the chrysler emblem, and part number stamped on the back side of the rim, their tj Moabs 16x8 (step side). 5" of backspace. They also exist (smooth side). Hope this helps. They r 5x4.5 ill need to make an hour drive to check for the stamp on the back but id rather be sure than buy junk. Thanks |
|
| Author: | Jeepjeepster [ Mon Jan 28, 2013 8:26 am ] |
| Post subject: | Re: Help please |
Pretty sure those rims came on the 2006 tj only. Those are the rims I have on my kj. 16", 5" bs, and 5x4.5" spacing. |
|
| Author: | John3:17 [ Mon Jan 28, 2013 8:40 am ] |
| Post subject: | Re: Help please |
Thanks everyone, glad to hear they are 5" bs, seems like most have the smoothsides and i wasnt sure these were the same. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|