| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rear hitch bolt size http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=74127 |
Page 1 of 1 |
| Author: | teckman02 [ Tue Feb 12, 2013 12:52 pm ] |
| Post subject: | rear hitch bolt size |
what is the bolt size and threading for the KJ |
|
| Author: | tjkj2002 [ Tue Feb 12, 2013 12:58 pm ] |
| Post subject: | Re: rear hitch bolt size |
M12x1.75 |
|
| Author: | teckman02 [ Tue Feb 12, 2013 1:13 pm ] |
| Post subject: | Re: rear hitch bolt size |
thanks troy |
|
| Author: | ChooChooman74 [ Tue Feb 12, 2013 1:35 pm ] |
| Post subject: | Re: rear hitch bolt size |
Are there bolts in the holes now? If not, I would recommend running a tap through them. I had to when installing my hitch. |
|
| Author: | dude1116 [ Mon Feb 18, 2013 3:27 pm ] |
| Post subject: | Re: rear hitch bolt size |
Tapping with a WD-40 covered bolt worked out pretty well for me too. |
|
| Author: | Ted15 [ Mon Feb 18, 2013 3:43 pm ] |
| Post subject: | Re: rear hitch bolt size |
dude1116 wrote: Tapping with a WD-40 covered bolt worked out pretty well for me too. Be very careful doing it that way, don't force it too hard or it could result in damage. A carbon steel bottom tap works very well to clean threads but be careful not to cut new ones. |
|
| Author: | dude1116 [ Thu Mar 07, 2013 6:42 pm ] |
| Post subject: | Re: rear hitch bolt size |
Ted15 wrote: dude1116 wrote: Tapping with a WD-40 covered bolt worked out pretty well for me too. Be very careful doing it that way, don't force it too hard or it could result in damage. A carbon steel bottom tap works very well to clean threads but be careful not to cut new ones. Either can do damage to threads! It worked out 6 times in a row so I'm good... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|