I finally had a mechanic do my timing belt change (apparently in the nick of time), but in the process he broke those little Christmas tree zip-tie retainer clips that hold the A/C line down on top of the fan shroud. Does anyone know where I can get replacement clips?

Thanks!

_________________
2005 Jeep Liberty Sport CRD, Silver, ORM and MAF Mods, Red Samcos, Fumoto Valve, Hayden Fan Clutch and 11 Blade Fan

Cut a couple of small blocks of ethafoam (common packing material for electronics like PCs or swimming noodles so if you don't have any should be easy to find) or similar item; carefully drill a matching hole in the fan shroud adjacent to the hole each clip base fit into; thread a UV stabilized zip tie thru each pair of matching holes; place ethafoam block between the zip ties/AC line on top of blocks and secure the zip ties. Total cost maybe $0.25 for 2.

All the clips do is keep the aluminum AC line from rubbing so any decent padding secured between the line and the fan shroud will do just fine.

Worked fine for me.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs