Make sure you put some grease on the splines.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Intermediate shaft install http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=78356 |
Page 1 of 1 |
| Author: | JeepMorrison [ Thu Feb 20, 2014 3:20 pm ] |
| Post subject: | Intermediate shaft install |
So ive search, but when you install a new shaft do you connect it to the cv shaft then slide the whole assembly into the diff case? Or install them as separate pieces? Sent with the power of children's screams!!! |
|
| Author: | tommudd [ Thu Feb 20, 2014 3:27 pm ] |
| Post subject: | Re: Intermediate shaft install |
I've done it both ways before. Not sure if there is aright or wrong way. |
|
| Author: | JeepMorrison [ Thu Feb 20, 2014 6:41 pm ] |
| Post subject: | Re: Intermediate shaft install |
Thanks Sent with the power of children's screams!!! |
|
| Author: | Ted15 [ Fri Feb 21, 2014 6:38 am ] |
| Post subject: | Re: Intermediate shaft install |
Make sure you put some grease on the splines.
|
|
| Author: | TheJawsOfDeath [ Thu Feb 27, 2014 6:12 pm ] |
| Post subject: | Re: Intermediate shaft install |
Either way will work, but I think your chances of accidentally damaging the axle seal are greater if you have the CV on there since it's just unwieldy, heavy, and harder to handle. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|