| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Feasibility of swapping 3.7L to 2.8L CRD parts. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=78433 |
Page 1 of 1 |
| Author: | WHITE the civilian [ Sun Mar 02, 2014 3:46 am ] |
| Post subject: | Feasibility of swapping 3.7L to 2.8L CRD parts. |
I own an 06 KJ Limited 3.7L There is a stock 2.8L CRD in my area I have a 1.5 inch OME lift kit (HD front) with JBA UCA's and RRO rock rails Could I swap these over to the 2.8L CRD, also will the stock CRD's suspension be able to be out on my then non lifted 3.7L? Thanks... Haha |
|
| Author: | tommudd [ Sun Mar 02, 2014 8:33 am ] |
| Post subject: | Re: Feasibility of swapping 3.7L to 2.8L CRD parts. |
Well you could BUT remember stock CRD coils are rated at 410 lbs, the OME 927s (HD)s are rated at 400 lb, so you would be actually running springs that are designed for less weight. So of course they would wear out faster . OME lists them as being able to use on CRD but I wouldn't advise it since you already have wear on them. |
|
| Author: | WHITE the civilian [ Sun Mar 02, 2014 8:58 am ] |
| Post subject: | Re: Feasibility of swapping 3.7L to 2.8L CRD parts. |
Excellent, so buy new springs if I go through with the deal (other dude says cool) |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|