It is currently Thu Mar 28, 2024 4:17 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 59 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: KJ Rear Bumper FOR SALE ORDER NOW !!
PostPosted: Thu Jun 19, 2014 7:50 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
We are now ready to start. The design will be like shown below EXCEPT without the holes across the face. There will still be holes on the lower section. There is one design only, no custom one offs.
I had to order 10 to start. 2 are spoken for already, so I have 8 that will be for sale. These are all laser cut and are looking great.
Any orders paid in full by the 15th will also get a free set of recovery shackles on the house. Price for the bumper is $695.00, with LED lights $775.00 OK, ALL PRICES PLUS SHIPPING
Retail is going to be 960.00
Shipping will be approximately 3 weeks from the date you order.
IF INTERESTED PM ME AND I WILL SEND YOU MY PAYPAL ACCOUNT INFORMATION.
THESE ARE BEING SOLD ONLY THROUGH MUDDS GARAGE :wink:


The bumper will weigh 70lbs with hardware, and will come with LED cube lights included ( you can see where they will mount on either side )
The tire carrier will come soon. The carrier will be
adjustable in height and angle and allow mounting of Rotopax gas can
setup. It will not come with a hitch, but the
factory hitch bolts right up under it if needed. The bumper is 1/8", and
the mounts are 1/4" with 3/4" shackle tabs. Pricing is yet to be determined.
I cannot give out any other information right now but this is the same place that is working on the front conversion bracket for KJ/KK to mount TJ/JK wrangler front bumpers, as well as new designed roof racks and sliders and front bumper that will have the same
theme as the rear bumper shown here.
So thoughts/comments ...............................I know you have them :wink: :lol:
Image
Image
Image
Image
Image
Image
Broke down for easier shipping than most other bumpers out there
Image Stock spare tire carrier can still be used if you want
Image

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 8:06 pm 
Offline
LOST Member

Joined: Wed Dec 22, 2010 12:18 am
Posts: 373
Location: Lake County, Illinois
My only question is; When will it be available???

That is exactly what I need. Nothing fancy, or heavy. Just steel out back.
I presume the LED's are for reverse lights...

_________________
Brad
International Man of Mystery, Singer of Sentimental Ballads,
Soldier of Fortune, Guardian of the Holy Hand Grenade of Antioch,
Bass Player Extraordinaire, Keeper of the Eternal Flame
of the Immortals, Master Swordsman, The "5th" Beatle,
Expert Marksman, Stand-up Comedian, Martial Artist,
Jeep owner, and all around swell guy.


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 8:13 pm 
Offline
Forum Admin
Forum Admin

Joined: Mon Jul 04, 2005 8:05 pm
Posts: 631
Location: Pasadena, CA
Looks awesome Tom, I am going to show this to a few people here. I bet they would be on board


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 8:15 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
NewOldTimer wrote:
My only question is; When will it be available???

That is exactly what I need. Nothing fancy, or heavy. Just steel out back.
I presume the LED's are for reverse lights...


Hoping will be available soon
and yes the LED Pods will be for back up lights

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 8:23 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Nov 04, 2007 3:02 am
Posts: 2053
Location: Michigan City, IN
Really nice looking, simple.

Would be nice if you could by the basic bumper, then add the tire carrier, gas can, etc.at a later date if you want or not at all.
Also would be nice if they make a front bumper in the same design too.

One thought: Is there any wind noise because of the holes? (Thinking of the noise I use to get when I used uni-strut for cross bars.)

_________________
Blood Clot Red 03 Punisher Edition
245/75-16 Duratracs, Soft 8's, Ironman/clevis Lift, Monroe Sensa-trac rear shocks, JBA 3.5, GTP Hood Louvers, Roof Basket & Light bar, Mudd's Garage Rear Bumper
custom made items: cross rails, grill inserts, cargo shelf, lightbar, pin stripping & rock rails.
L.O.S.T. #DW090501


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 8:31 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
501 wrote:
Really nice looking, simple.

Would be nice if you could by the basic bumper, then add the tire carrier, gas can, etc.at a later date if you want or not at all.
Also would be nice if they make a front bumper in the same design too.

One thought: Is there any wind noise because of the holes? (Thinking of the noise I use to get when I used uni-strut for cross bars.)


DARYL, WE'LL CONNECT THE FRONT AND REAR BUMPERS WITH TUBES THAT WAY THE WIND WILL FLOW RIGHT THROUGH :ROTFL:

Whoops sorry for the caps :oops:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 9:16 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Nov 04, 2007 3:02 am
Posts: 2053
Location: Michigan City, IN
tommudd wrote:
501 wrote:
Really nice looking, simple.

Would be nice if you could by the basic bumper, then add the tire carrier, gas can, etc.at a later date if you want or not at all.
Also would be nice if they make a front bumper in the same design too.

One thought: Is there any wind noise because of the holes? (Thinking of the noise I use to get when I used uni-strut for cross bars.)


DARYL, WE'LL CONNECT THE FRONT AND REAR BUMPERS WITH TUBES THAT WAY THE WIND WILL FLOW RIGHT THROUGH :ROTFL:

Whoops sorry for the caps :oops:


We could put holes in the tubes and cork plugs on electronic controlled hinges so that when driving down the road one could hit buttons on the center of the steering wheel and play music!! :ROTFL:

_________________
Blood Clot Red 03 Punisher Edition
245/75-16 Duratracs, Soft 8's, Ironman/clevis Lift, Monroe Sensa-trac rear shocks, JBA 3.5, GTP Hood Louvers, Roof Basket & Light bar, Mudd's Garage Rear Bumper
custom made items: cross rails, grill inserts, cargo shelf, lightbar, pin stripping & rock rails.
L.O.S.T. #DW090501


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 9:42 pm 
Offline
LOST Newbie
User avatar

Joined: Sat Nov 03, 2012 4:55 am
Posts: 87
Location: Colorado
Looks good, So bolting those bumper brackets on with a hitch and mopar skid plate will work? Longer bolts required?

_________________
2003 Sport
3.7 45rfe
LOKKA Rear locker
OME 927 NS131's
JBA top plates
JBA A-Arms
3 ring clevis
Terraflex bump stops
OME 948 extra iso N132L's
Hockey pucks
Optima Red Top
Cobra 19 4' Firefly on Tram Triple Mag Mount
MOABS W/ 245/75/16 E Duratracs
ASFIR ARMOR
Rock Lizard Super Skink's
Other Stuff................


Size 13 Carbon Foot Print


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 10:04 pm 
Offline
LOST Junkie
User avatar

Joined: Sat May 25, 2013 8:22 pm
Posts: 572
Location: Westlake, Ohio
501 wrote:
...We could put holes in the tubes and cork plugs on electronic controlled hinges so that when driving down the road one could hit buttons on the center of the steering wheel and play music!! :ROTFL:

Brand new for 2015 - the innovative Jeep Calliope:

http://en.wikipedia.org/wiki/Calliope_%28music%29

_________________
--Prof

927/948 OME Springs - Bilstein Shocks - JBA Upper Control Arms - Rage Black Widow Roof Basket - Viper 3606V Alarm System


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 10:56 pm 
Offline
LOST Junkie

Joined: Mon Feb 04, 2013 12:27 pm
Posts: 637
Looks like it may fit a kk


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Thu Jun 19, 2014 11:22 pm 
Offline
LOST Junkie

Joined: Mon Mar 24, 2008 10:26 pm
Posts: 943
Location: West Coast, Canada
Are they going to make a version without all the speed holes? lol

Not sure I am digging that look.

_________________
2006 Liberty CRD Limited

Provent @ 43,000 km
SEGR in progress
SAMCO Sport hoses @ 48500 km
Goodyear Wrangler Duratrac LT225/75R16


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 1:48 am 
Offline
LOST Addict
User avatar

Joined: Sat Mar 17, 2012 12:53 am
Posts: 1343
If they need a supplier for the led pods, you know where to go ;)


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 6:37 am 
Offline
LOST Member
User avatar

Joined: Fri Apr 14, 2006 2:44 pm
Posts: 178
Location: Fremont CA
I'm digging the design but don't like the holes in the upper middle section or the led square holes. Its nice to see r&d going into a libby.

_________________
Outlaw KJ '04 4X4 v6 Sport
Frankenlifted front, custom springs 4" rear, 23.25" F/R - 265/75 Duratracs 16x7 D windows- JBA 4.5 UCAs, Y-link - AEM Brute Intake - Rockcrusher diff cover, Mopar Front Skid, All J belly skid, Skink Sliders - EBC Green Stuff F/R - DTT Front, 4.10s


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 7:59 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Jul 18, 2012 8:53 pm
Posts: 1404
Location: The WV Panhandle
I'm liking it. Had to set back and use my imagination a little and carry the hole theme a little further. Accessories, Soft 8's , a front bumper with similar design etc. etc. . Good option for keeping the Libby light but still have steel bumpers.

_________________
2003/3.7 SOLD

2007 Wrangler - traded

2010 Wrangler Rubicon


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 9:39 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
WolverineFW wrote:
Are they going to make a version without all the speed holes? lol

Not sure I am digging that look.


Maybe....., possibly could do the center section without the holes, but sides will remain, with the design of the front bumper design having the same overall look and being part of the look we are going for, some have to remain. Otherwise I think they will just look like others, trying to set these apart with a " new " look not seen on KJs up till now.
I guess I'm old and have always really liked the "speed holes". I remember a lot of the old drag racing cars back in the 60s having those punched in and they looked bad a**!! Someone said they looked Rat Rodish but here they have been doing this for years. Rat Rods are just reviving an old tradition. So until more items are welded up just imagine front and rear bumpers with the same theme :wink:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 9:40 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
John3:17 wrote:
I'm liking it. Had to set back and use my imagination a little and carry the hole theme a little further. Accessories, Soft 8's , a front bumper with similar design etc. etc. . Good option for keeping the Libby light but still have steel bumpers.



See you're getting the overall theme now :ROTFL:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 9:42 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
fortx4 KJ wrote:
I'm digging the design but don't like the holes in the upper middle section or the led square holes. Its nice to see r&d going into a libby.


Have to keep the R&D going, Just found my Step dad an 05, I would like to have a couple more before the year is out. My goal is to have an 02-03-04, :wink: :roll: :wink: So what else are we to do but keep trying to keep the KJs alive !! :ROTFL:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 10:20 am 
Offline
LOST Junkie

Joined: Mon Mar 24, 2008 10:26 pm
Posts: 943
Location: West Coast, Canada
tommudd wrote:
WolverineFW wrote:
Are they going to make a version without all the speed holes? lol

Not sure I am digging that look.


Maybe....., possibly could do the center section without the holes, but sides will remain, with the design of the front bumper design having the same overall look and being part of the look we are going for, some have to remain. Otherwise I think they will just look like others, trying to set these apart with a " new " look not seen on KJs up till now.
I guess I'm old and have always really liked the "speed holes". I remember a lot of the old drag racing cars back in the 60s having those punched in and they looked bad a**!! Someone said they looked Rat Rodish but here they have been doing this for years. Rat Rods are just reviving an old tradition. So until more items are welded up just imagine front and rear bumpers with the same theme :wink:


I think if you it had the center piece without all the holes and left the side pieces as they are it would look better IMHO. But that is just me. lol

_________________
2006 Liberty CRD Limited

Provent @ 43,000 km
SEGR in progress
SAMCO Sport hoses @ 48500 km
Goodyear Wrangler Duratrac LT225/75R16


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 11:35 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
I should of clarified some more on the speed holes, the bottom row will remain regardless, the ones on the face could be omitted if the customer wants it like that. Everything that is being planned will have speed holes so have to stay with that theme

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: New KJ Rear Bumper In the Works !!!
PostPosted: Fri Jun 20, 2014 11:25 pm 
Offline
LOST Newbie

Joined: Mon Oct 07, 2013 10:23 pm
Posts: 40
Location: Hills of West By God
I like it. Buuuuuttttttttttttttttt.............what if I have the tow hitch???????


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 59 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com