LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

KJ REAR BUMPER
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=79978
Page 5 of 6

Author:  JohnnyCRDhead [ Thu Jul 06, 2017 4:01 pm ]
Post subject:  Re: KJ REAR BUMPER

Did we get enough people on this yet to get any made? Just curious.

Author:  crasher [ Sun Jul 16, 2017 2:06 pm ]
Post subject:  Re: KJ REAR BUMPER

tommudd wrote:
Shannon wrote:
TURBO-DIESEL-FREAK wrote:
You are thinking of the Komodo Dragon rear bumper, right? :wink:


I'm 100% in for a Komodo...almost got a used one about a year ago but the guy disappeared from the forum so maybe he sold it locally or to someone else IDK.


Sorry but REALLY wish some would read and look at Pictures
The Komodo was/is a Rock Lizard bumper I'm not Rock Lizard


btw, you're going to have to link to pix that aren't on photo-bucket.

just kinda ... uhm... tossing that... uhhhh ... in there.

:D

Author:  Poonjabber [ Tue Jul 25, 2017 8:48 pm ]
Post subject:  Re: KJ REAR BUMPER

JohnnyCRDhead wrote:
Did we get enough people on this yet to get any made? Just curious.
Wondering that myself... Is this a thing yet?

Sent from my LGLS991 using Tapatalk

Author:  tommudd [ Wed Jul 26, 2017 1:45 pm ]
Post subject:  Re: KJ REAR BUMPER

Talking to 5th fabricator right now,
people say they want work then when you show them what you have, whats required ( cut and bend per my specs ) , they say yes and then " Oh by the way it will be 3-4 months" CRAZY
Of course one place already took my plans and made one , but looked like 5 year old welded it

Author:  CRD Joe [ Wed Jul 26, 2017 11:53 pm ]
Post subject:  Re: KJ REAR BUMPER

Id like to get in on this. Like so many, I wish I had bought one of the rear bumpers some of the members were making.

Anything I can do to help out. I want a tire carrier and a gas can carrier.


Tom

Author:  JohnnyCRDhead [ Thu Jul 27, 2017 10:50 am ]
Post subject:  Re: KJ REAR BUMPER

Well some progress is better than none.

Author:  tommudd [ Fri Jul 28, 2017 7:22 pm ]
Post subject:  Re: KJ REAR BUMPER

Met with two other fabrication shops today
One gave an estimate right away,
He would build them for me, but a minimum of 50 at 900 each
I waited for the punch line..........and he just stood there
So asked if he was serious and yes he was ............. :furious:
Oh and money up front before he would even think of starting
Told him Thanks and walked away................
Other shop will figure up have estimate by Monday afternoon.
Looking at both plain bottom and ones with holes like first go-around

Author:  TURBO-DIESEL-FREAK [ Fri Jul 28, 2017 8:00 pm ]
Post subject:  Re: KJ REAR BUMPER

tommudd wrote:
Met with two other fabrication shops today
One gave an estimate right away,
He would build them for me, but a minimum of 50 at 900 each
I waited for the punch line..........and he just stood there
So asked if he was serious and yes he was ............. :furious:
Oh and money up front before he would even think of starting
Told him Thanks and walked away................
Other shop will figure up have estimate by Monday afternoon.
Looking at both plain bottom and ones with holes like first go-around



Look, Tommudd... I think we can do smaller batches up here in Canada AND get a better price.... it is worth a try at least.

PM me with contact info.

Author:  GordnadoCRD [ Fri Jul 28, 2017 9:27 pm ]
Post subject:  Re: KJ REAR BUMPER

TURBO-DIESEL-FREAK wrote:
tommudd wrote:
Met with two other fabrication shops today
One gave an estimate right away,
He would build them for me, but a minimum of 50 at 900 each
I waited for the punch line..........and he just stood there
So asked if he was serious and yes he was ............. :furious:
Oh and money up front before he would even think of starting
Told him Thanks and walked away................
Other shop will figure up have estimate by Monday afternoon.
Looking at both plain bottom and ones with holes like first go-around



Look, Tommudd... I think we can do smaller batches up here in Canada AND get a better price.... it is worth a try at least.

PM me with contact info.

Take advantage of that Cheap Canadian Labor? Get some business back from China!!
If only it were less expensive to ship across the border than to ship across the Pacific...

Author:  tommudd [ Fri Jul 28, 2017 11:49 pm ]
Post subject:  Re: KJ REAR BUMPER

Wonder how we sneak bumpers across the border ? Go over without one, install over there , uninstall here, back across...... :ROTFL:

Author:  GordnadoCRD [ Fri Jul 28, 2017 11:52 pm ]
Post subject:  Re: KJ REAR BUMPER

:rockon: breaker breaker one nine, we got us a convoy. :JEEPIN: :JEEPIN: :JEEPIN: :JEEPIN: :lol:

Author:  TURBO-DIESEL-FREAK [ Sat Jul 29, 2017 3:14 am ]
Post subject:  Re: KJ REAR BUMPER

tommudd wrote:
Wonder how we sneak bumpers across the border ? Go over without one, install over there , uninstall here, back across...... :ROTFL:



The product will most definitely meet NAFTA. I can even research with my contact at the Department of U.S. Customs and Border Protection to get the HTSUS number and/or get an online NAFTA ruling from one of the C.B.P. Import Specialists.

One of my customers here in Edmonton is a very good fabricator, and can weld steel, stainless steel and aluminum.... VERY well. We really like the Komodo Dragon rear bumper design, and I think we can pull it off in steel or aluminum. We require plans and dimensions, though, and some idea of how to pre-cut and bend the pieces before welding.

I will talk to him, and see what he thinks.

Author:  Jackson68 [ Sat Aug 12, 2017 9:50 pm ]
Post subject:  Re: KJ REAR BUMPER

Im in, i need front and back bumpers asap. By the way Hi, im jack- new here. Yes I've been looking and looking for an alternative steel front bumper, can't believe how hard they are to find. Please contact me if there's something available or if you guys are going to make something I want in on it. Thanks Jack

Sent from my SAMSUNG-SM-N920A using Tapatalk

Author:  Wantsawillys [ Mon Aug 21, 2017 11:15 am ]
Post subject:  Re: KJ REAR BUMPER

I'm very interested in any form of rear bar replacement that is available. There's nothing local here at all. If assistance could be gained in shipping to Australia then you've got a sale, and i'll pay up front, none of this half and half nonsense.
Ideally a set of swing away arms would be sweet.

Of course, some working pictures wouldn't hurt... :D Can you get those fixed so we can see what the bar looks like?

Thanks in advance!

Author:  Wantsawillys [ Tue Aug 29, 2017 1:51 am ]
Post subject:  Re: KJ REAR BUMPER

Wantsawillys wrote:
Of course, some working pictures wouldn't hurt... :D Can you get those fixed so we can see what the bar looks like?

Thanks in advance!


I'm such a numpty. Didn't realise i could just open the failed images directly to photobucket.

Wasn't working on my phone...

That is one VERY nice looking bar. Can't wait to see what a proposed swing out section looks like

Author:  CRD Joe [ Wed Oct 04, 2017 3:58 pm ]
Post subject:  Re: KJ REAR BUMPER

Im still interested. :banghead:

Author:  Piscatory_7 [ Wed Feb 14, 2018 9:14 pm ]
Post subject:  Re: KJ REAR BUMPER

tommudd wrote:
Wonder how we sneak bumpers across the border ? Go over without one, install over there , uninstall here, back across...... :ROTFL:


Would you consider selling the plans and we could get a local fabricator to build one?

Author:  rsscoggins [ Wed Feb 21, 2018 10:56 pm ]
Post subject:  Re: KJ REAR BUMPER

I would be interested in a front or rear bumper


Sent from my iPhone using Tapatalk

Author:  tommudd [ Wed Mar 14, 2018 7:55 pm ]
Post subject:  Re: KJ REAR BUMPER

Piscatory_7 wrote:
tommudd wrote:
Wonder how we sneak bumpers across the border ? Go over without one, install over there , uninstall here, back across...... :ROTFL:


Would you consider selling the plans and we could get a local fabricator to build one?

no

Author:  rhyanb12 [ Tue Mar 20, 2018 2:36 am ]
Post subject:  Re: KJ REAR BUMPER

Would love to have a rear bumper with tire carrier also.

Page 5 of 6 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/