| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Need Photo: Y Link & Read torsion bar http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=81502 |
Page 1 of 1 |
| Author: | Pippobug [ Fri Mar 06, 2015 5:35 am ] |
| Post subject: | Need Photo: Y Link & Read torsion bar |
Hi, My mechanic is having problems re fitting the rear torsion bar after installing the Y link, any chance someone can please post up a couple of nice photos I can show him how it's supposed to go? I have a KJ 2003. Thank you, Fil. |
|
| Author: | John3:17 [ Fri Mar 06, 2015 8:51 am ] |
| Post subject: | Re: Need Photo: Y Link & Read torsion bar |
Do you mean the JBA extension?
|
|
| Author: | Pippobug [ Fri Mar 06, 2015 1:14 pm ] |
| Post subject: | Re: Need Photo: Y Link & Read torsion bar |
John, No, I mean with the Y link in place where the sway bar goes, how it fits around the Y Link please. Ideally I am looking at a side photo showing sway bar and Y link so we now where the tow are as my mechanic can't get it back on without is knocking the Y link. Thank you, Fil. |
|
| Author: | Pippobug [ Sat Mar 07, 2015 3:30 am ] |
| Post subject: | Re: Need Photo: Y Link & Read torsion bar |
Anyone a photo please? |
|
| Author: | tommudd [ Sun Mar 08, 2015 6:54 pm ] |
| Post subject: | Re: Need Photo: Y Link & Read torsion bar |
Only one way for it to go, bolts right up the same way. Not sure why there would be an issue |
|
| Author: | WhitbyKJ [ Sat Mar 21, 2015 3:25 pm ] |
| Post subject: | Re: Need Photo: Y Link & Read torsion bar |
trying to put it on a 180 degrees the wrong way? is that possible? can't get the bolts started properly because one arm is higher than the other? mixed up the bolts? info baby... need more of it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|