| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Front Top Strut Plate Ripped Out http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=8354 |
Page 1 of 1 |
| Author: | Myke [ Tue May 09, 2006 11:05 pm ] |
| Post subject: | Front Top Strut Plate Ripped Out |
I was wheeling in some mud and the drivers side strut ripped through the strut plate. Has this happened to anyone else? any of you guys who have frankenlifts would you be willing to part with your stock strut plate? I will pay for shipping. |
|
| Author: | KJ-BOL [ Wed May 10, 2006 1:23 am ] |
| Post subject: | |
I still got all my original parts boxed up - pm me if you still need it |
|
| Author: | OzLtd [ Wed May 10, 2006 1:53 am ] |
| Post subject: | Re: Front Top Strut Plate Ripped Out |
Myke wrote: I was wheeling in some mud and the drivers side strut ripped through the strut plate. Has this happened to anyone else?
any of you guys who have frankenlifts would you be willing to part with your stock strut plate? I will pay for shipping. Seriously mate, how the hell did this happen ? Have you got pics? If the strut top is bolted to the body with 4 M10 high tensile bolts, I cant see how it would simply 'rip out' ??? (just curious?) |
|
| Author: | Myke [ Wed May 10, 2006 9:22 am ] |
| Post subject: | |
Yes I still need it. The strut still has the bolt on it. The bolt pulled through the plate. The plate is still bolted the body. When I get the new strut plate I will deff take pics. |
|
| Author: | CRDSTU [ Thu May 11, 2006 4:52 am ] |
| Post subject: | |
Myke wrote: The strut still has the bolt on it. The bolt pulled through the plate.
 The plate is still bolted the body. When I get the new strut plate I will deff take pics.Good cause i'll hell confused ! 
|
|
| Author: | Myke [ Thu May 11, 2006 12:59 pm ] |
| Post subject: | |
are all the struts the same through out the years? |
|
| Author: | Edwin [ Thu May 11, 2006 11:32 pm ] |
| Post subject: | |
Myke wrote: are all the struts the same through out the years?
Yes I believe they are. |
|
| Author: | snow blower [ Fri May 12, 2006 1:11 am ] |
| Post subject: | |
how did it happen??? Did you hit the mud going fairly fast?? This i gotta see for sure... |
|
| Author: | Myke [ Fri May 12, 2006 9:09 am ] |
| Post subject: | |
We fixed it last night with some washers (ghettooooo) and it seems to be working. It was a $2 fix. We got so angry because it was cold and raining I forgot to take any pics but I will draw you a small pic 
Ok #1 is where the strut goes through and a bolt goes on top of it. I was wheeling through some super deep mud and pretty fast at that. I hear a pop and some noise like metal poping around. I got out and did a thorough inspection of the whole front end. So we see the strut is crooked in the spring. Basicly we fixed it by putting washers on the top and bottom of the inner rubber section of the plate. I'm going wheeling tonight to see if it holds up if it does I won't replace it just yet. If it breaks I will buy yours KJ-BOL. |
|
| Author: | Jeepjeepster [ Fri May 12, 2006 10:45 am ] |
| Post subject: | |
Wow, crazy that it pulled through that. You must of hit a nice bump and unloaded the front suspension really hard. |
|
| Author: | Myke [ Fri May 12, 2006 1:50 pm ] |
| Post subject: | |
I will admit I have had the front wheels off the ground before, not that high just a few inches. Also the plate did have 70k+ miles on it. |
|
| Author: | CRDSTU [ Sun May 14, 2006 4:48 am ] |
| Post subject: | |
Myke wrote: I will admit I have had the front wheels off the ground before, not that high just a few inches. Also the plate did have 70k+ miles on it.
That answers alot of it.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|