LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Fram ph3600 vs. fram ph3614
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=83988		 Page 1 of 1
Author:  QuestMan [ Sat Feb 06, 2016 3:40 pm ]
Post subject:  Fram ph3600 vs. fram ph3614
I went into Wally World to buy a filter today. After I grabbed the correct size (ph3600), I went to the checkout. There the kid on the counter told me, "If we're ever out of the 3600s, you can use a 3614". I looked him in the eyes and replied, "I have a 6 cylinder. the 3614 is for the 4 cylinder, and I'd NEVER put a smaller filter on my Jeep". he just looked confused.

This is why I change my own oil :banghead:
Author:  HoosierJeeper [ Sat Feb 06, 2016 4:50 pm ]
Post subject:  Re: Fram ph3600 vs. fram ph3614
In before the oil filter debate starts
:SOMBRERO:

There is one size bigger that works, don't know the brand or part number. I'd be worried in changing from the factory spec because of the threads.
Author:  G.O.A.T. [ Sat Feb 06, 2016 11:51 pm ]
Post subject:  Re: Fram ph3600 vs. fram ph3614
The 3614 will technically work, but it has reduce filter capabilities.
Author:  flash7210 [ Sun Feb 07, 2016 8:06 am ]
Post subject:  Re: Fram ph3600 vs. fram ph3614
What about a PH8a?
I know that Toyota pickups that use the ph3614 can also use the ph8a which is a lot bigger.
Author:  QuestMan [ Sun Feb 07, 2016 8:22 pm ]
Post subject:  Re: Fram ph3600 vs. fram ph3614
Quote:
The 3614 will technically work, but it has reduce filter capabilities.


That was my point.

[quote][/What about a PH8a?quote]

Don't know, but I can't take my filter out behind the fan (I have both electric and mechanical), and underneath I can barely get the 3600 out. I won't go smaller, but I don't think I'd like to go much bigger, either.
Author:  riptricket [ Sun Feb 07, 2016 11:11 pm ]
Post subject:  Re: Fram ph3600 vs. fram ph3614
Wix
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/