LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Everything went haywire.. please help
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=84128		 Page 1 of 1
Author:  ekeefe41 [ Mon Feb 29, 2016 8:57 am ]
Post subject:  Everything went haywire.. please help
Turn on the Jeep, went to turn on headlights and did not work... The hazard lights came on instead steady not blinking...

Then like every light came on, gas reader went to zero, ebreak light went on.

Checked for codes and the computer is throwing the kitchen sink at me.

U0146
P0146
P0299
P0888

B2tae

p0700


Still runs, but not well...

Just had a ton of work done to it too, timing belt and a few other things... i Have paid about $3200 in repairs over the last two months and now Want to cry... or drive in to a tree.

Any ideas?

:banghead:
Author:  ekeefe41 [ Mon Feb 29, 2016 1:42 pm ]
Post subject:  Re: Everything went haywire.. please help
Edit: It does start... when i was checking fuse's i moved the started fuse to the wrong hole. (i am not a mechanic or that bring for that matter)
Author:  flash7210 [ Mon Feb 29, 2016 1:43 pm ]
Post subject:  Re: Everything went haywire.. please help
Definitely an electrical problem.

First thing I would do is have the battery tested or replaced. These things can act strangely when the battery is going bad.

Most of the codes seem to point to a problem with the TCM and could be a bad fuse or a bad relay or just low voltage.

The p0299 code is turbo underboost which seems unrelated.

I would post this question in the CRD section to get more replies.
Author:  ekeefe41 [ Mon Feb 29, 2016 3:37 pm ]
Post subject:  Re: Everything went haywire.. please help
Thanks man, i thought i was in CRD section, was on my phone.

My bad
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/