My Libby is D.O.A. (Dead on axles). Last week, it wouldn't start. I checked the codes, and came up with a P0513, which means it no longer recognized the keys. After having the SKIM replaced, and 2 new keys programmed, it still wouldn't start. Now, the dealership is telling me that the computer is bad, I need a new one, the cost is going to be $1300 above and beyond the $654 already charged for installing the SKIM, and an additional $200 for programming. To make matters worse, they can't get a new ECM, they're on backorder, and don't even have a ship-by-date.

So... Does anyone know of a good place to either a: send in my old ECM and have it fixed, or b: a reliable place to buy a refurb from?

_________________
E.E.P. for my Jeep (EMPTYING EVERY POCKET)
2004 Limited - Stock no more
JcrOffroad sliders-Trail tested, mud approved
Frankenlifted
Al's A-Arms
Stock Skids
235/70/16 Cooper Discoverer HTPs

autocomputerexchange.com
Try them, come preprogrammed
They may have

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Jumped the gun, before I saw your reply and sent it to a place in Il. Their consensus is that the processor is shot, and they aren't able to repair. I'll give Autocomputeexchange a call once I get the ecm back.

_________________
E.E.P. for my Jeep (EMPTYING EVERY POCKET)
2004 Limited - Stock no more
JcrOffroad sliders-Trail tested, mud approved
Frankenlifted
Al's A-Arms
Stock Skids
235/70/16 Cooper Discoverer HTPs