Post a pic of what is broke...
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| what do you call it http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=8618 |
Page 1 of 1 |
| Author: | Kj Juice [ Wed May 17, 2006 10:13 am ] |
| Post subject: | what do you call it |
i broke the connector to my fog lights and i can not find a replacement.. i dont know if i am typing in the wrong name or what. all i can find is the light housing and the light kit.. not just the connector and wire. i have checked the salavge yards in my area and i can't even find a liberty.. help me please |
|
| Author: | 2006KJSPORT4x4 [ Wed May 17, 2006 10:20 am ] |
| Post subject: | |
have you tried a search for wiring harness or something like that perhaps...i'm afraid it might be an all or none thing....you get the fog lamp and the cables and whatnot together and not seperate... |
|
| Author: | sleeve84028 [ Wed May 17, 2006 11:07 am ] |
| Post subject: | |
What side of the connector did you break? The vehicle side = the entire lenght of harness from the light switch to the fog light -or- The light side = replace the entire light fixture or possibly the harness itself |
|
| Author: | Kj Juice [ Wed May 17, 2006 11:24 am ] |
| Post subject: | |
the acutal connector that goes on to the light prongs. if that makes sense |
|
| Author: | Guyute1210 [ Wed May 17, 2006 11:57 am ] |
| Post subject: | |
|
Post a pic of what is broke... |
|
| Author: | Boi1ermaker [ Wed May 17, 2006 12:35 pm ] |
| Post subject: | |
i found a harness from chrysler parts direct, part number 82205247. The connectors didn't match up with the rocky mountain edition fog lights i bought. I ended up cutting the ends off both the lights and the harness and splicing them together. If you post a picture and whichever end is broken may match something i saved. i'd be happy to send a connector to you if you want to take a shot at splicing a new end on. |
|
| Author: | gopherbeats [ Wed May 17, 2006 1:47 pm ] |
| Post subject: | |
Boi1ermaker wrote: The connectors didn't match up with the rocky mountain edition fog lights i bought. I ended up cutting the ends off both the lights and the harness and splicing them together.
I would just splice and solder them.. then you do not have to waste your time trying to find a part that may not fit anyway |
|
| Author: | Kj Juice [ Thu May 25, 2006 5:42 pm ] |
| Post subject: | |
ok sorry it took so long. not having a dig camera hurts. 
that is the piece if you can see the black wire has some corrasion. would that cause it not to work.. the other side works fine. but just not that one and yes i tried replacing the bulbs.. any help |
|
| Author: | Jeepjeepster [ Thu May 25, 2006 8:37 pm ] |
| Post subject: | |
I do not see anything wrong in that pic? Looks like you need to cover those wires with black tape if you would like? Is that what you are talking about? Or did you break one of the tabs ON the connector? |
|
| Author: | n3qik [ Thu May 25, 2006 8:57 pm ] |
| Post subject: | |
If it is for a 05, then this is what you need. If so, PM me your address and I will sent it to you free of charge. 
|
|
| Author: | Kj Juice [ Fri May 26, 2006 12:39 am ] |
| Post subject: | |
that is the piece i need.. i think mine is just fried from getting in a bunch of water |
|
| Author: | Boi1ermaker [ Fri May 26, 2006 9:57 am ] |
| Post subject: | |
i believe i've cut off that same connector i'll have to dig up my box of parts to make sure. if anybody else has the same problem, i've got two more in a box somewhere if anybody else need them. |
|
| Author: | KJ02 [ Fri May 26, 2006 12:45 pm ] |
| Post subject: | |
I bought mine at Pep-Boys |
|
| Author: | n3qik [ Fri May 26, 2006 8:09 pm ] |
| Post subject: | |
Kj Juice wrote: that is the piece i need.. i think mine is just fried from getting in a bunch of water
Got your PM, will mail it on Tuesday. Glad to help someone out. |
|
| Author: | n3qik [ Wed May 31, 2006 10:31 pm ] |
| Post subject: | |
It's in the mail, should get there by lets say Xmas?? |
|
| Author: | Kj Juice [ Fri Jun 02, 2006 5:29 pm ] |
| Post subject: | |
thanks again. got it today.. hooked it up and magically the light works.. thanks again.. you sure you dont want some money for it |
|
| Author: | n3qik [ Fri Jun 02, 2006 6:37 pm ] |
| Post subject: | |
Nope, would have sat on the shelf till hell froze over. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|