Just finished putting the rear driveshaft back on the KJ (took it off to get new ujoints put on) backed it out, took it for a ride and got back and fold this bolt laying on the ground in the garage. It's about an inch long and the head is a 12mm. Any ideas on what it's from? Only took the 4 driveshaft bolts out of the KJ, and they're all there plus this one is smaller. Skid plate bolts are there. Not 100% sure it's from the KJ even, but thought maybe someone might recognize it.




Thanks!

_________________
05 KJ Limited 4x4 in Light Khaki: Detours USA Backbone, Warn M8000, Huskyliners, RockLizard Super Skink sliders, OME/Bilstein Lift, JBA UCA's, 245/70/17 Nitto Terra Grapplers
07 LR3 SE V8
1996 XJ Country
2015 KL Limited

Mine is in the air right now, and I just went over everything front to back from under the rig. The only thing that is about that size are the rear boomerang bolts where they mount to the frame and the front disc brake caliper bolts, but neither have those markings on the head.
I'd guess it's from something else.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770

Thanks! I got under mine again and the tcase has similar bolts, but different markings. The only other vehicles that park there are the LR3 and the KL, so I guess I should check those out.

_________________
05 KJ Limited 4x4 in Light Khaki: Detours USA Backbone, Warn M8000, Huskyliners, RockLizard Super Skink sliders, OME/Bilstein Lift, JBA UCA's, 245/70/17 Nitto Terra Grapplers
07 LR3 SE V8
1996 XJ Country
2015 KL Limited