DarkEnemy wrote:
Did a search and found some decent topics but most of the pics wont load. Maybe the threat is too old? I do like your copper pipe install. What about this one?
http://www.auerbach.ca/kj/provent/ If you could tell me what you used I could see about doing it your way.
Also let me see if I get how the filter is installed. The top connector on the filter comes from the ccv and the bottom goes to the hose from the air intake that connects the airbox to the turbo correct? Then you need a drain tube installed on the bottom?
Thanks in advance.
That link shows all the parts, but personally I like placing the PRoVent on the passenger's side of the engine compartment since the turbo intake boot is on that side.
I looked at that location before I mounted mine, but did not like the idea of mounting something to the ECM bolts!
You are correct on the connectors and for hose some use the polyvinyl reinforced hose.
one of my early install pictures before adding the copper pipe:
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve