flash7210 wrote:
Quote:
What is the correct CRD length vs the Gasser length for the CV?
I do not know what is the correct CV axle length for a CRD.
But I do know that when you buy replacement CV axles you have to specify that you want ones for a Liberty with a 4 cylinder engine. Otherwise you will get axles for the V6 Liberty that may not be the correct length.
These are the CV Axles data from NAPA (if this is wrong, please let me know)
Left Front:CV Driveshaft - Left Front - Remfd
PRODUCT LINE: NAPA MaxDrive
PART NUMBER: NMD 958483
Specifications:
Contents Axle Nut Included
CV Driveshaft Compressed Length 23 3/4 in.CV Driveshaft Thread Size M24 x 2.0
Inboard Joint Type Spline
Includes ABS Inner Sensor Ring No
Inner Joint Spline Count 27
Longevity Enhancements 3% Moly Grease
New Components Neoprene Boots
Outboard Joint Type Spline
Outer Joint Spline Count 27
UNSPSC 25173807
Right Front:CV Driveshaft - Right Front - Remfd
Part Number: NMD 958484
Product Line: NAPA MaxDrive
Part Number: NMD 958484
Specifications:
Contents Axle Nut Included
CV Driveshaft Compressed Length 25 1/16 in.Inboard Joint Type Spline
Includes ABS Inner Sensor Ring No
Inner Joint Spline Count 24 + 2 Blank
Longevity Enhancements 3% Moly Grease
New Components Neoprene Boots
Outboard Joint Type Spline
Outer Joint Spline Count 27
UNSPSC 25173807
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve