| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| I want to modify the rear seat from a 2006... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=89191 |
Page 1 of 1 |
| Author: | crasher [ Thu Aug 30, 2018 11:03 am ] |
| Post subject: | I want to modify the rear seat from a 2006... |
I want to buy a used seat out of a wreck/parts Jeep and cannibalize it it for the seat back and hinges/hardware. My plan is to remove and store my stock rear seat and build a storage box in the area my rear seat now occupies, with a plywood cover, and still be able to use the seat back (with no seat cushions) to sit level on the new lower cover that I can fold up and keep the rear area as a smaller area I can put groceries in so they don't slide forward every time I brake. The plan is to keep the seat back on it's original hinges and use the seatback locks, while fabricating a carpeted top cover for the box I will build where the original seat frame and bottom cushions are now... I'd like to make it look as stock to outside observers looking in the windows as I can, while the seat back is folded down to it's original flat position. All that is to get to the point: Will a rear seat from any 2002 to 2005 rear seat bolt in in place of the 2006, or are the holes and locks different at some point? Thanks. |
|
| Author: | Sir Sam [ Tue Sep 11, 2018 11:53 pm ] |
| Post subject: | Re: I want to modify the rear seat from a 2006... |
They are all the same. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|