| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| snorkel question for a crd http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=91949 |
Page 1 of 1 |
| Author: | mr.jerryfluffy [ Wed May 26, 2021 12:06 pm ] |
| Post subject: | snorkel question for a crd |
hello! this may be a dumb question but the next mod im saving up for is a snorkel. Im wondering since I converted my air intake into a v6 one (old one cracked junkyard has many v6s) should I get the snorkel for the gas liberty's? Thanks! |
|
| Author: | bugnout [ Wed May 26, 2021 5:27 pm ] |
| Post subject: | Re: snorkel question for a crd |
Hmm, Which models are you considering? I don't think it matters. The snorkels I've seen require you to cut a big hole in the right front fender and the air box. That side of the air box is the same for both gassers and CRD's. |
|
| Author: | mr.jerryfluffy [ Thu May 27, 2021 5:16 am ] |
| Post subject: | Re: snorkel question for a crd |
Thanks for the input, that’s what I figured too but safari snorkel and alibaba both have different models for both gas and crd Libbys. I wonder what the difference is. I’m prolly leaning towards alibaba I got quoted $300 for one, it’s a piece of plastic might as well save $200 they claim it’s made from LLPDE. |
|
| Author: | layback40 [ Thu May 27, 2021 6:55 pm ] |
| Post subject: | Re: snorkel question for a crd |
I did some research before I got one. Worked out that one for a Mitsubishi diesel would fit. They call them Pajero's in Australia. It was about 1/4 the price of a Safari KJ one. I was able to plumb it to the inlet of the diesel air cleaner. Cutting the hole is a bit of a worry. Very gently with a hole saw on a drill. It needs to have a very long horizontal section. That limits your choices. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|