On an '06 Liberty the Moog specs call for a K7391 sway bar links.
using the search of a supplier they sent me K750127.
The K750127 is about 1" longer, the offset bends seem to be fine, item fits, (The k750127 is for a 2007-11 Liberty & Nitro.
Question: anyone see harm in them being 1" longer & possible front end problems ?

Why did they send you the wrong parts?
I would require them to send the correct parts to fit your Jeep!
Installing incorrect parts can cause problems.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

I wouldn't necessarily expect issues from a 1" longer link, but with suspension components it's generally best to use the exact specified parts. The bushing preload could potentially be altered enough to cause weird noise or vibration down the road.

Definitely return than and get the correct parts with right size. A neighbor used wrong front sway bar links for a month and it developed uneven front tire wear at the passenger side followed by a clunk noise. He end up with new sway bar links, wheels, and tires.

_________________
2007 Jeep Wrangler JK 2dr 4x4 Rubicon