LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Group Buy for Front Diff Collar
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=9691		 Page 1 of 11
Author:  AdamIsAdam [ Thu Jun 22, 2006 12:32 pm ]
Post subject:  Group Buy for Front Diff Collar
Let the ordering begin!!!
Call or fax John at:
631-293-8271
fax 293-8006

Re: LOST Group Buy
$72.14+ shipping or tax (see below)


Updated Post wrote:

UPDATED 6/23 AT NOON:
The Aluminum PN is 8A309. Cost is $72.14. This is the price to get it to Long Island. When you call, you'll get the shipping cost for John to resend it to you. He said between $5-10 depending on your area. Sales tax added only for NY, NJ, CT residents.

WE ALL NEED TO BUY THE ALUMINUM to get this price. If you want to save the $5 for the steel, I'm assuming you're out of the group buy since it throws off our price. Based on all data and nominal price increase, I'm changing the group buy to the aluminum part. I hope this is ok for everyone.


Original Post wrote:
I called a local NY Stafford dealer and he can get the parts with ID of 3 9/16" for $67.50 each with a minumum order of 10. (Or, $75 each for 3-9 orders. Retail is $112 for one.) He'll even ship them each directly to your respective addresses for additional shipping charges. We'll simply each fax or call John with the order info and our personal credit cards. I guess we should establish a list here, and a cutoff date, and then tell everyone to do their own faxing once we hit 10.

The shop is in Farmingdale, NY here on Long Island. The contact there is John. The order info is filed under my name, Adam Rosenfeld.

Air & Power Transmission Incorporated
81 Gazza Blvd
Farmingdale, NY 11735

631-293-8271
fax 293-8006

The steel black oxide part is Stafford PN 8L309. (UPDATE: we're not buying this one.)


---------------------------------------------------
Please post here if you are in. Let's try to keep the chatter to a minimum because we already have two VERY long threads on this topic. In fact, please read those threads if you have any questions to avoid redundancies. They are located here:


http://www.lostjeeps.com/forum/phpBB3/vie ... 2952#92952
and
http://www.lostjeeps.com/forum/phpBB3/vie ... 2716#92716
Author:  AdamIsAdam [ Thu Jun 22, 2006 12:33 pm ]
Post subject:  I'm in.
..................................................................
Here's the OFFICIAL GROUP BUY LIST:

1) AdamIsAdam --ORDERED--
2) pixeldzn --4 ORDERED--
3) KJ-BOL part of pixeldzn's order
4) bthomas --ORDERED--
5) tjkj2002 --ORDERED--
6) DoverKJ --ORDERED--
7) meduncan part of pixeldzn's order
8) DarbyWalters --ORDERED--
9) Lil Matty --ORDERED--
10) DirtyKJ --ORDERED--
11) KJJeepGirl --ORDERED--
12) CaKJFreedom --ORDERED--
13) KJ04 --ORDERED--
14) TheChucklesStart --ORDERED--
15) Loopkey --ORDERED--
16) FarmDiesel
17) KJ02 --ORDERED--
18) KW AV8R --ORDERED--
19) W3CSX --ORDERED--
20) EagleVT94
21) MULE --ORDERED--
22) BakerKJ part of pixeldzn's order
23) MoladoGuy --ORDERED--
24) grtelli --ORDERED--
25) USAFCOP --ORDERED--
26) CtrlAltDel --ORDERED--
27) DaveKJ02 --ORDERED--

And here's the list I just received (7/8) from John. If your name is not on here but should be, then CALL JOHN ASAP!

---------------------------------------------------------
Adam,

Here is the final list:

Adam Rosenfeld
Troy Young
Phil Lewis
Bill Sidhipong
Steve Baux
Chris Loeppky
Matthew Duncan
Donald Neyrinck (4 pcs)
David Strassel
Dave Tunc
Walter Darbyshire
Peter Higgs-Coulthard
Troy Johnson
Alex Salcedo
Garry Richetelli
Nanette Nelms
Jason Vance
Nicholas Steranka
Brian Wood
Ted Fest
Catherine Anderson
Bengamin Thomas

Order has been placed with the factory.

ORDERS CAN STILL BE ACCEPTED UNTIL 07/14/06.

Thank you,

John Barone, Product Specialist
Air & Power Transmission Inc.
(631) 293-8271
Author:  meduncan [ Thu Jun 22, 2006 12:36 pm ]
Post subject: 
I'm in on this.
Author:  pixeldzn [ Thu Jun 22, 2006 1:16 pm ]
Post subject: 
I'm in for 2 - 1 for me and 1 for KJ-BOL, shipped to the same address.

if BakerKJ wants one, that can go to my house as well if he wants. Save on shipping that way.
Author:  0311_DoC [ Thu Jun 22, 2006 1:25 pm ]
Post subject: 
So when is the cut off date???
Author:  bthomas [ Thu Jun 22, 2006 1:25 pm ]
Post subject: 
bthomas too!

W/o looking at the past thread(s), does this collar fit on it's inside surface so no additional metal removal is necessary?
Author:  tjkj2002 [ Thu Jun 22, 2006 1:59 pm ]
Post subject: 
I'm in for one.
Author:  AdamIsAdam [ Thu Jun 22, 2006 2:03 pm ]
Post subject: 
bthomas wrote:
bthomas too!

W/o looking at the past thread(s), does this collar fit on it's inside surface so no additional metal removal is necessary?


Please read the past threads.



... but the answer is YES.


When we get 10, we can all decide how long to keep it open. Please note that this takes 3 weeks to got according to John. Sorry that I forgot to mention that before.
Author:  DarbyWalters [ Thu Jun 22, 2006 2:54 pm ]
Post subject: 
I am in for one also...do I have to wear a tie with the collar?
Author:  bthomas [ Thu Jun 22, 2006 3:22 pm ]
Post subject: 
Thai on the collar? Try to get that out with a napkin and club soda.

Thx, yes I read the threads as soon as I hit the submit. As far as an ordering date, I'll pitch for ASAP. I'd be really happy to have one by the KJWest Big Bear event 7/21, for the John Bull Trail.
Author:  DoverKJ [ Thu Jun 22, 2006 3:41 pm ]
Post subject: 
Does that price include shipping? or would that be an extra cost?

What do the normally retail for.

I maybe in for on as well.
Author:  AdamIsAdam [ Thu Jun 22, 2006 3:49 pm ]
Post subject: 
DoverKJ wrote:
Does that price include shipping? or would that be an extra cost?

What do the normally retail for.

I maybe in for on as well.


Plus shipping depending on your address. I think he's having htem sent directly to us, so I'm not sure where they're coming from.

They are $112.60 each. $75 each for 3-9, less 10% or $67.50 for 10 or more.

Given that it takes 3 weeks to get, as soon as we hit 10 orders, I'm going to call John and tell him we're ready and make sure he's ready to handle the orders. I think he just wants faxes, so I'll verify that. I'll tell him to call it the "LOST group buy."

When we hit 10, I'll call him and post back here with exact ordering instructions.
Author:  DoverKJ [ Thu Jun 22, 2006 4:34 pm ]
Post subject: 
I am in then. Just let us know when everything is ready. Can you tell him some of us would prefer to call then to send our credit card numbers over a fax machine?

At least I am more comfortable calling over faxing.
Author:  AdamIsAdam [ Thu Jun 22, 2006 4:47 pm ]
Post subject: 
DoverKJ wrote:
I am in then. Just let us know when everything is ready. Can you tell him some of us would prefer to call then to send our credit card numbers over a fax machine?

At least I am more comfortable calling over faxing.


I'll tell him.
Author:  Mutt [ Thu Jun 22, 2006 5:54 pm ]
Post subject: 
Are these collars aluminum or steel? If they are alloy, I may be in for another. Even though I rubber coated mine, I don't like the thought of electrolosys due to dis-similar metals.
Author:  dirtykj [ Thu Jun 22, 2006 5:55 pm ]
Post subject: 
I'll call in with my credit card info. Yes I guess I'm number 10 then?

The movie is "Escape from New York", Kurt Russell. Didn't think Kurt was right for the part --- he looked too "small" compared to the muscle-bound stars of his period.
Author:  XJJeepGirl [ Thu Jun 22, 2006 6:10 pm ]
Post subject: 
I'm in for one.

Catherine
Author:  CaKJFreedom [ Thu Jun 22, 2006 6:51 pm ]
Post subject: 
In. $68 + shipping for peace of mind? Why not?
Author:  KJ04 [ Thu Jun 22, 2006 7:09 pm ]
Post subject: 
I'm in for one, and I'd like to call my credit card # in also.

What was Mutt referring to with the two different metals???
Author:  Mutt [ Thu Jun 22, 2006 7:18 pm ]
Post subject: 
KJ04 wrote:
.

What was Mutt referring to with the two different metals???


Here.....

"Electrolytic Corrosion (Electrolysis) occurs when dissimilar metals are in contact in the presence of anelectrolyte, such as water (moisture) containing very small amounts of acid. The dissimilar metals set up a galvanic action that results in the deterioration of one of them. "

If you put steel on your aluminum diff, put some thin rubber between the two, or use a rubberized coating as corrosion inhibitive.
Page 1 of 11 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/