LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

3" Tonylift
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=103&t=40786		 Page 1 of 1
Author:  tonycrd [ Sun Mar 01, 2009 4:42 pm ]
Post subject:  3" Tonylift
Hi all, I finally finished fitting my so long thought of and desired lift.

It consists of:

OME 927/948
Koni heavy track front shocks
Rancho RSX 17004 rear shocks
Rusty's top plates
3 ring clevis
+1 upper isolater on the rear
JBA gen 3.5 upper control arms
Terraflex front bumpstops
Cut to size rubber mallets rear bumpstops

Here's what I got:

Image

Here's what the front looks like:

Image

Here's what the rear looks like:

it's parked on the curb so it seems the bumpstop is very close to the extra one I fitted to protect the Rancho shocks, but in normal driving conditions it sits further apart.

Image

Test driven it for a little bit, very happy with it!

Image

Now need some bigger tires...fast..:D

And I thought it deserved this now:

Image
Author:  501 [ Sun Mar 01, 2009 6:53 pm ]
Post subject: 
Looks great Tony and I love your gas door!
Author:  JIMMY JEEP [ Mon Mar 09, 2009 6:53 pm ]
Post subject: 
WOW got your lift at last eh Tony ?,looking good m8 just needs tyres like you said.Bet that has made it much more useable off road now.
Author:  Xodius [ Wed Mar 11, 2009 4:34 pm ]
Post subject: 
Where did you get that gas door? Looks good.
Author:  dutch kj [ Wed Mar 11, 2009 5:01 pm ]
Post subject: 
Very nice lift tony.
I hope that my KJ looks the same as yours in time.
Do you have also cut the gap by the upper A-arm?
Is this easy to do?
Author:  tonycrd [ Tue Mar 31, 2009 11:19 am ]
Post subject: 
JIMMY JEEP wrote:
WOW got your lift at last eh Tony ?,looking good m8 just needs tyres like you said.Bet that has made it much more useable off road now.


Thanks m8! Yes it doesn't rattle my bones anymore...:D Hope get new rims and tires on soon.


Xodius wrote:
Where did you get that gas door? Looks good.


In a car 'tuning' store like your advanceauto etc. It's made for a Seat Ibiza, but fits the KJ too.

Sorry, not available in the US....you can find one that looks like mine on E-bay.

I added the carbon look myself, also a decal..

dutch kj wrote:
Very nice lift tony.
I hope that my KJ looks the same as yours in time.
Do you have also cut the gap by the upper A-arm?
Is this easy to do?


Yes that is quite easy to do, you can either use a Dremel tool like I did or in your case ( Frankenlift) use an angle grinder to cut the pockets even bigger ( Slijptol ).
Author:  FinKj [ Mon Aug 31, 2009 6:48 am ]
Post subject:  Re: 3" Tonylift
[quote="tonycrd"]Hi all, I finally finished fitting my so long thought of and desired lift.

It consists of:

OME 927/948
Koni heavy track front shocks
Rancho RSX 17004 rear shocks
Rusty's top plates

RUSTY´S TOP PLATES !!

You didn´t by any chance make any blueprints out of those?

NOT that I´m willing to copy as such, but.....

I´ve longed those plates forever now... :o
Author:  tonycrd [ Tue Sep 08, 2009 5:51 pm ]
Post subject: 
Yep we did...

But a friend of mine has them now, he's trying to make some himself.

When he gives them back I'll see if I can scan them and post a pic with sizes.

And I have new tires and rims...finally...moabs

Image

Image
Author:  FANGO [ Wed Sep 09, 2009 2:58 pm ]
Post subject: 
Very nice optic with this tires!
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/