LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Racor R20 element for 230 series 2-10-30 MICRON http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=103&t=46018 |
Page 1 of 1 |
Author: | kelticknight [ Fri Aug 21, 2009 9:16 am ] |
Post subject: | Racor R20 element for 230 series 2-10-30 MICRON |
Racor R20 element for 230 series 2-10-30 MICRON a good replacement for the 2.5 crd 2002 liberty 9cherokee,think tonycrd was fitting one put havent seen any post here to say how he got on,can buy on ebay at good price |
Author: | tonycrd [ Tue Aug 25, 2009 4:23 pm ] |
Post subject: | |
Yeah...sorry mate, I am totaly useless, I have one lying around but still couldn't find the time to see if it fits. All I know for sure is that it fits on the filter head.... |
Author: | tonycrd [ Thu Nov 26, 2009 3:17 pm ] |
Post subject: | |
R20S should fit a KJ 2.5CRD. Nick from Greece is using one. |
Author: | kelticknight [ Sat Dec 12, 2009 8:45 pm ] |
Post subject: | |
got the filter and fits good too stock system at a fraction of price of stock filter from stealership |
Author: | tonycrd [ Tue Feb 16, 2010 2:33 pm ] |
Post subject: | Re: Racor R20 element for 230 series 2-10-30 MICRON |
I couldn't get the R20, so I got the R25. It fits too, although it's a bit longer then the R20. Remember, always get the S..(2 micron) |
Author: | Lancer [ Fri May 14, 2010 3:39 am ] |
Post subject: | Re: Racor R20 element for 230 series 2-10-30 MICRON |
Any idea if it'll fit a 2005 2.8? |
Author: | tonycrd [ Wed May 19, 2010 10:57 am ] |
Post subject: | Re: Racor R20 element for 230 series 2-10-30 MICRON |
No it won't, unless you change the whole thing. See here. http://liberty.eurekaboy.com/racor.htm |
Author: | Lancer [ Wed May 19, 2010 3:51 pm ] |
Post subject: | Re: Racor R20 element for 230 series 2-10-30 MICRON |
Thanks Tony. I haven't had any problems yet, so I think I'll leave well alone |
Author: | kelticknight [ Fri Sep 23, 2011 7:53 am ] |
Post subject: | Re: Racor R20 element for 230 series 2-10-30 MICRON |
will the Racor 245 fuel assembly fit 2.5 crd kj ?? |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |