When I set / cancel the alarm with the remote (keyless entry), the indicater lights flash, but when the alarm is sounding, there is no visible indication. Is it possible to get the lights or indicators to flash? (When I hear an alarm, I look to see which vehicle it is).
I have also noticed that the only way to no arm the alarm is to lock the drivers door with the key. Unfortuantly, this does not lock all the other doors, which means I have to remote lock, then unlock drivers door then lock using the key. In the old XJ, just using the internal door lock button would lock the doors but disable the alarm.
I will admit that it's not very often I need to lock the vehicle with the alarm disabled (usually only required when travelling on ferries), but I am worried that the time I forget, I will return to my Jeep and find a flat battery.
Ivan
_________________ The Toy aka The Giant: 2001 4.0L Wrangler with 4.5" Suspension Lift, 1" Body Lift, 33" BFG MTs, ARB Lockers, Snorkel The DD aka GeoJeep: 2007 Wrangler Sahara Unlimited 2.8crd Auto. Plan to fit 3.5" AEV Lift, 33" Cooper STT Mud Tyres.
|