I have the 2' Daystar and am about to upgrade to the 245/75-16 Duratracs. Will I need bigger bump stops or should it not make to much of a difference?

_________________
(The worst thing you can do to a Jeep...is never taking it off road.)
'15 WK2 Ecodiesel Overland (My Overland rig)
'11 Green KK Renegade (My Crawler!)
Texans, come join us at Lone Star LOST!
https://www.facebook.com/groups/253493118163702?ref=bookmark&_rdr

i didnt have bump stops on mine. go flex it out and see if it rubs.

I have a 2.5" OME lift with 225/75/16 and stock bump stops. I've flexed both front and rear out fully without any rubbing. I have about a half inch between the tire and fender at full flex. I would think with the 245/75/16 you would kiss the fenders.

Sent from my Galaxy Nexus using Tapatalk 2

_________________
2008 Jeep Liberty KK, SkySlider, Tow Package, OME/Bilstein Lift, Flowmaster Delta 50, Removed Resonator, DuraTracs, In-dash CB, PIAA 520 ATPs, Dual KJ Tow Hooks
http://www.cardomain.com/ride/3974106/2008-jeep-liberty
Lost Jeeps PNW/BC Members Map

Bump stops are not just for making sure tires do not hit the fenders
They also limit travel so you do not stack your springs or over compress your shocks

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Front bumpstops are important too...
I filled in my rear spacers with plywood rounds and sealed it all with rtv. Why they make them hollow i don't know.

Hard to see it in the pic but look closely at the bottom spacer.

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS

ATHFAB.com