HOW TO: DASH BEZEL DISASSEMBLE

Diggerfreek · **Posted:** Thu Sep 25, 2008 9:53 pm

TOOLS

FIRST APPLY SLIGHT PRESSURE TO BOTH OF THE CARBON FIBER STRIPS LIKE SO

ONCE THE BEZEL POPS OUT A LITTLE, GRAB THE CENTER AND PULL

AFTER THE TOP CLIPS ON THE BEZEL ARE POPPED OUT, PULL UP AND OUT TO UNSEAT THE BOTTOM POSTS

NEXT IS TO REMOVE THE ELECTRICAL CONNECTIONS. THERE ARE 4 OF THEM (AT LEAST ON MINE)

RE-INSTALLATION IS THE OPPOSITE

MNKK · **Posted:** Thu Sep 25, 2008 9:56 pm

Informative, but one question.
If the re install is the opposite, how did you refill the gulp?

Diggerfreek · **Posted:** Thu Sep 25, 2008 9:58 pm

do you really want to know? :wink:

MNKK · **Posted:** Thu Sep 25, 2008 10:05 pm

Diggerfreek · **Posted:** Thu Sep 25, 2008 10:07 pm

oh and no, the next door neighbor is not one of the tools required

Mr Nick · **Posted:** Fri Sep 26, 2008 12:49 am

Whatcha doin in there?

ups4 · **Posted:** Fri Sep 26, 2008 9:44 pm

Diggerfreek wrote:

oh and no, the next door neighbor is not one of the tools required

She is kinda....cute.
Can she just help out a little...maybe :twisted:

.

Paul

Diggerfreek · **Posted:** Fri Sep 26, 2008 10:24 pm

Mr Nick wrote:

Whatcha doin in there?

evil evil things... actually, it was a request from another member. A couple months ago I did install my Sirius unit, so i was in there snaking wires

Diggerfreek · **Posted:** Fri Sep 26, 2008 10:27 pm

ups4 wrote:

Diggerfreek wrote:

oh and no, the next door neighbor is not one of the tools required

She is kinda....cute.
Can she just help out a little...maybe :twisted:

.

Paul

IDK, she is kinda old for me and has a 13yo kid, but she does know how to work a wrench :twisted:

MNKK · **Posted:** Sat Sep 27, 2008 1:47 am

I am SO sending this thread to her now. Let me get her email address?.?.

Diggerfreek · **Posted:** Sat Sep 27, 2008 9:06 pm

stripesace · **Joined:** Sat Oct 18, 2008 1:25 pm **Posts:** 54

Anyone see anyway of removing any of the buttons down where the 15v power button and ESP buttons are? I'm thinking I want to put a light to light up the center console with a healthy glow while driving at night to see directions,etc I may have printed, etc.

I'm looking to do something like this

http://www.cardomain.com/ride/566877

Theguin623 · **Posted:** Tue Aug 03, 2010 5:34 pm

Just bought a 2010 Limited on Saturday. I want to hook my iPod up so I can control it with the steering wheel controls. There is unbelieveably little info about this subject. All I know is that I need the iPod cable that connects to the uconnect module. Everything I have read says that it won't work on the Liberty. I have the RES/RSC radio with factory installed uconnect.

I am posting this on the bezel removal thread because I was hoping someone that has followed these steps and has factory uconnect can tell me where the module is mounted before I tear my dash apart. I want to see, with my own two eyes, that the module does not have the iPod connection. Thanks in advance!!

CollinKK · **Posted:** Thu Feb 24, 2011 4:31 pm

Thank you for this. Now I can finally fix what that rook over at the audio place messed up. Put my dang dash kit in backwards so it sticks out on the top and goes in on the bottom. Needless to say it does NOT look that nice. Now off to go fix the situation.

HOW TO: DASH BEZEL DISASSEMBLE

Who is online