LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
KK aftermarket parts/suppliers http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=39022 |
Page 1 of 4 |
Author: | Diggerfreek [ Thu Jan 08, 2009 9:46 pm ] |
Post subject: | KK aftermarket parts/suppliers |
Ok every one, this is going to be an on going project to provide every one information on all aftermarket parts and suppliers for items such as bumpers, rock rails, lifts, ect.... Feel free to post as I will update the original post with your info UPDATED 04-06-2010 Light Bar STT Fabrications Full Suspension Replacement Lift Kits JBA 2.5 inch JBA 4.0 inch Rocky Road Rockfather Spacer Lift Kits Daystar Revtek Rock Krawler Rustys Sky Jacker Tera Flex Bumpers Front BIG TUBE BAR Rear Steelcraft rear bumper bar Bull Bar Westin Bull Bar Romik Steelcraft Sport Bar Black Horse Aries Grill Guard Steel Craft Rock Rails Rocky Road Outfitters Nerf Bar Westin Romik Diff Covers Ruff stuff Crane Rock Crusher Riddler Gears http://www.automotivepartsunlimited.com/ring.htm Roof Racks Rocky Road Outfitters Locker Aussie Locker ARB Detroit Locker Air Intake AEM BRUTE FORCE 2008 KK ONLY... K&N 63 K&N 77 Replacement/Serviceable A-Arms JBA Gen 4.5's Rocky Road Outfitters INSANE ARMS Replacement Brake Lines Stopflex SS braided Lines Wheel Spacer Spider Trax 1.25" Custom Fit Seat Covers Wet Okole Alan Graham Motoring Accessories Tail Light protection Steel Craft Winch Mount KJ/KK Back Bone System Performance Jet Performance Chip Stage 1 #90701 Stage 2 #90701s B&G Performance PCM/TCM |
Author: | nightdrv [ Sat Jan 10, 2009 12:00 am ] |
Post subject: | |
Don't forget the Brute Force Intake by AEM! |
Author: | Diggerfreek [ Sat Jan 10, 2009 12:13 am ] |
Post subject: | |
nightdrv wrote: Don't forget the Brute Force Intake by AEM!
Thanks, Done X3 |
Author: | toy4everyseason [ Sun Jan 11, 2009 3:20 am ] |
Post subject: | |
Don't forget Westin for Bully Bars |
Author: | Diggerfreek [ Sun Jan 11, 2009 4:02 am ] |
Post subject: | |
toy4everyseason wrote: Don't forget Westin for Bully Bars
oh and one more thing, go and check out the tech section |
Author: | MtnLuvr [ Sat Jan 17, 2009 12:49 pm ] |
Post subject: | |
First, thank you very much Digger for starting this list. I hope it will help current and future KK owners. Ok, I went and dug through all the bookmarked favorites I've accumulated over the past year and came up with the following aftermarket supplier additions: A. Additional "Bull Bar" suppliers: -1 Romik at http://www.romik-usa.com/Romik-USA_JEEP_LIBERTY.html -2 Steelcraft ("Sport Bar") at http://www.steelcraftautomotive.com/sport_bars.html B. If "Rock Rails" is for true "Rock Rails / Sliders" (which I am quite anxious to see RL's full length rock rails), then some people not as much into off-roading may also be interested in "Decorative Side Step / Nerf Bars" such as (in addition to OEM): -1 Westin at http://www.westinautomotive.com/ (if you search for 'Liberty' you can see they have them for the 25 and 26 series product lines) -2 Romik at http://www.romik-usa.com/Romik-USA_JEEP_LIBERTY.html C. To complement "Grill Guards", we could add a section for "Tail Light Guards". I wish we had multiple options for these. The only one I've been able to locate thus far is: Steel Craft at http://www.steelcraftautomotive.com/index.html (note: seems like their "taillight guard" link is currently broken, but we know they make them since at least one person on here has purchased them and you can buy them at places like http://www.dealsofsteel.com/product_info.php?products_id=3512) D. Even though no one (yet hopefully) makes KK bumpers, front or rear, it appears you can get a "Rear Bumper Guard" from Steelcraft at http://www.steelcraftautomotive.com/rear_bumper_guard.html. To me, a rear bumper guard seems akin, or the counterpart, to the "grill guards". E. For "Lockers", can't the Detroit Locker be utilized on the KK? (per thread http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=36653&highlight=locker) F. For "Lift Kits", we may want to segregate these into "Spacer Style" like you can get from Revtek or Daystar versus the "True Suspension Upgrade Style" that fortunately we have a couple options available from JBA. I hope this helps. |
Author: | Diggerfreek [ Sat Jan 17, 2009 5:58 pm ] |
Post subject: | |
Thanks a bunch, I will get these posted up top tonight |
Author: | Diggerfreek [ Mon Jan 19, 2009 1:22 am ] |
Post subject: | |
Updated with new info 1/18/2009 |
Author: | BrendonR [ Wed Jan 21, 2009 6:31 pm ] |
Post subject: | |
Hey Digger - You've got the AEM Brute Force Intake - can you give us a mini-review here? How was the install? Did you notice a power gain? Can anyone vouch for the K&N intakes? Thanks Brendon |
Author: | yjtj [ Wed Jan 21, 2009 7:55 pm ] |
Post subject: | |
also have all the mopar stuff like the roof basket and bumper guard. |
Author: | Diggerfreek [ Thu Jan 22, 2009 12:38 am ] |
Post subject: | |
yjtj wrote: also have all the mopar stuff like the roof basket and bumper guard. Do you have any picture?
|
Author: | Diggerfreek [ Thu Jan 22, 2009 12:43 am ] |
Post subject: | |
BrendonR wrote: Hey Digger - You've got the AEM Brute Force Intake - can you give us a mini-review here? How was the install? Did you notice a power gain?
Can anyone vouch for the K&N intakes? Thanks Brendon The install took less than 15 minutes... as far as power, going by the seat of my pants, me like ...how was that? Also I would stay away form the K&N do the oil on the filter.. It could fry your MAF sensor |
Author: | yjtj [ Thu Jan 22, 2009 3:02 am ] |
Post subject: | |
Author: | BrendonR [ Thu Jan 22, 2009 10:15 am ] |
Post subject: | |
Diggerfreek wrote: The install took less than 15 minutes... as far as power, going by the seat of my pants, me like ...how was that? Also I would stay away form the K&N do the oil on the filter.. It could fry your MAF sensor Very Interesting Digger - I've had that constant itch since I got my Liberty - I wanted 20-30 more HP, simply for highway riding - passing trucks and such can be a little... iffy. Not to mention, I think if the 3.7L were a little more powerful, it would get a little better mileage, as it would be easier for it to pull the LIberty's 4500 lbs. Do you think we're talking 5-10 more? or 10-20? I think 10's usually a pretty respectable number with intakes. Just curious. How's the highway pull after the install? Thanks again. |
Author: | MtnLuvr [ Thu Jan 22, 2009 9:03 pm ] |
Post subject: | |
Diggerfreek wrote: yjtj wrote: also have all the mopar stuff like the roof basket and bumper guard. Do you have any picture?You can find an electronic copy of the 2008 Jeep Liberty Accessories catalog on-line at http://www.jparts.com/brochures/liberty_2008.pdf. You can find an electronic copy of the 2009 Jeep Liberty Accessories catalog on-line at http://www.jparts.com/brochures/09_liberty.pdf or http://www.scribd.com/doc/6967669/2009-Jeep-Liberty-Accessories Hope this helps. |
Author: | yjtj [ Fri Jan 23, 2009 12:59 am ] |
Post subject: | |
i see in the 2009 catalog they have a cold air intake listed, wonder what the part number and price is? |
Author: | SilverKK09 [ Fri Jan 23, 2009 2:17 am ] |
Post subject: | |
yjtj wrote: i see in the 2009 catalog they have a cold air intake listed, wonder what the part number and price is?
AFIK its juts a K&N CAI painted blue.... |
Author: | zoso7374 [ Fri Jan 23, 2009 11:27 am ] |
Post subject: | |
yjtj wrote: i see in the 2009 catalog they have a cold air intake listed, wonder what the part number and price is?
I had a jeep parts guy call chrysler for me about it . . . and they said despite the fact it is in the catalog, it is not yet available for the KK. Just get the Brute Force Intake. |
Author: | yjtj [ Fri Jan 23, 2009 12:09 pm ] |
Post subject: | |
well if its a mopar part they wont even try to void the warrenty, thats why i was asking. |
Author: | zoso7374 [ Fri Jan 23, 2009 12:15 pm ] |
Post subject: | |
yjtj wrote: well if its a mopar part they wont even try to void the warrenty, thats why i was asking.
A valid point, but I don't think an intake would void your warranty. But as a extended lifetime warranty owner myself, I definitely see you point. |
Page 1 of 4 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |