LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

KK aftermarket parts/suppliers
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=39022		 Page 3 of 4
Author:  Diggerfreek [ Sat Mar 20, 2010 9:00 pm ]
Post subject:  Re: KK aftermarket parts/suppliers
E2 wrote:
This is not updated....

Missing gears that bob... posted on the 5" lift topic.
Also should add the lockers he just added.
Also how about the roof rack option that you have?

And by the way we all that you for your time to even make this page.



:goink: :goink:

I'll work in doing gear research tonight
As far as the lockers go, I don't like listing sites that sell them because they may be cheaper else where, HOWEVER I will change it up and add in the model numbers needed for our KK's

I could relist the RL rack, but since he is taking a break, it doesn't make since to advertise something that isn't for sale....


Also, ALL OF YOU ARE WELCOME!!!!!!!!!!!!! :BANANA: :pepper: :BANANA: :pepper: :BANANA: :pepper:

With out help from all of you, I wouldn't have all of the parts listed that I do :mrgreen:
Author:  nightdrv [ Tue Apr 06, 2010 12:51 am ]
Post subject:  Re:
tkoss47165 wrote:
http://www.thuleracks.com/

Thule Roof Racks and Baskets


and Yakima! (racks and baskets)
Author:  nightdrv [ Tue Apr 06, 2010 12:59 am ]
Post subject:  Re:
MtnLuvr wrote:
KKommando wrote:
here you go digger update for all them big ballers

http://www.gobidodge.com/nitro.htm
http://www.trailwerks.com/servlet/the-1 ... LTH/Detail


Interesting find KKomando. I'd like to see how this rack looks on a KK.



oOoooo @ gobidodge.com. They've already done my ladder idea... I bet it's stupidly expensive though.
Author:  Diggerfreek [ Tue Apr 06, 2010 2:48 pm ]
Post subject:  Re: KK aftermarket parts/suppliers
Updated
Author:  NewJerseyKK [ Sat Nov 27, 2010 10:06 pm ]
Post subject:  Re: KK aftermarket parts/suppliers
I found another company that makes taillight protection. Thought Id share.

http://www.usautoguru.com/products/Jeep ... uards.html
Author:  MtnLuvr [ Sat Nov 27, 2010 10:40 pm ]
Post subject:  Re: KK aftermarket parts/suppliers
NewJerseyKK wrote:
I found another company that makes taillight protection. Thought Id share.

http://www.usautoguru.com/products/Jeep ... uards.html


Good find (I hope) NewJerseyKK. Their website doesn't list the tail-light guards for the 08+ KK Liberty but they do for the KJ (02-07) Liberty, the Grand Cherokee and Commander. Anyone have these, have an email from them confirming they do indeed make them for the KK Liberty?
Author:  NewJerseyKK [ Sat Nov 27, 2010 11:17 pm ]
Post subject:  Re: KK aftermarket parts/suppliers
MtnLuvr wrote:
NewJerseyKK wrote:
I found another company that makes taillight protection. Thought Id share.

http://www.usautoguru.com/products/Jeep ... uards.html


Good find (I hope) NewJerseyKK. Their website doesn't list the tail-light guards for the 08+ KK Liberty but they do for the KJ (02-07) Liberty, the Grand Cherokee and Commander. Anyone have these, have an email from them confirming they do indeed make them for the KK Liberty?


There might be a glitch in my link or something but I think the one I posted is for the 08+ KKs. Heres the link again in case the other one is glitchy. http://www.usautoguru.com/products/Jeep ... uards.html
Here is the ebay listing I found them on. The last picture is of a KK. I dont know how long the ebay listing will last but here it is anyways.
http://cgi.ebay.com/ebaymotors/Tail-Lig ... 518wt_1165
Author:  MtnLuvr [ Mon Jan 10, 2011 11:27 am ]
Post subject:  Re: KK aftermarket parts/suppliers-Transmission Pan
Maybe we should add the larger oil capacity, finned aluminum transmission pans (as dieselenthusiast first posted here). I just saw them in the March 2011 issue of Jp magazine too.

Here's a link to the (lower profile to fit with skid plate) one for the KK's 42RLE automatic transmission: PML YourCovers.com.
Image
See page 2 of dieselenthusiast's post for photos of the unit he got for his kJ.

Not sure if any KK owner has yet tried one, but they are reported to fit on the KK and have been tested and used on KJs and TJs. Benefits are reported as around 1.5 quarts more capacity, better cooling, magnetic drain plug, etc.
Author:  brianb1998 [ Tue Feb 08, 2011 2:40 pm ]
Post subject:  Re: KK aftermarket parts/suppliers
I have been searching for this months no thanks everyone
Author:  MtnLuvr [ Thu Feb 24, 2011 12:03 am ]
Post subject:  Re: KK aftermarket parts/suppliers
For diff gears, we could list Motive Gear (here's their PDF catalog), which JBA sells here.

Also, should we list JBA's Dana 30 Steel Axle Housing? I don't know that anyone has yet tried one on a KK, but I bet it's pretty likely to fit a KK since it fits a KK.
Author:  slipperybrain [ Wed Apr 20, 2011 6:22 pm ]
Post subject:  Re:
Pierocksmysocks wrote:
Just curious, it was discussed on this board a while back (Novemberish of last year) concerning "Cherokee" side moldings. Did anyone have any success with locating a supplier for these? Sorry I've been away doing army schtuffs for the past 4 months, and this is the first time I've had the chance to look for them.



I was curious about the same thing!
Author:  At The Helm [ Sat Jul 02, 2011 11:58 am ]
Post subject:  Re: KK aftermarket parts/suppliers
Asfir skids should be added.
Author:  gren71 [ Thu Dec 15, 2011 10:13 am ]
Post subject:  Re: KK aftermarket parts/suppliers
Digger, could you add suppliers of spring isolators im having a hell of a time trying to find the correct ones for KK.

Same for Top plates for front struts..

I know its oddly specific, but id appreciate it.
Author:  Jeepin_it_real [ Wed Jan 04, 2012 12:12 am ]
Post subject:  Re: KK aftermarket parts/suppliers
top plates i actually have for sale if your interested, but i have a bunch of things i sent to you digger that i think we can add to here
Author:  Wearyman [ Tue Oct 23, 2012 3:17 pm ]
Post subject:  Re: KK aftermarket parts/suppliers
Steelcraft also makes a very nice brush guard for the KK that matches the rear bumper guard in design and colors. It is available on their site, and also from Autoanything.com as the Aries branded brush guard.

Not sure if you can mount a winch to it, but it does have pre-drilled light mount points.
Author:  JeepNCrowd [ Tue Jan 28, 2014 2:44 pm ]
Post subject:  Re: KK aftermarket parts/suppliers
I think this thread needs some updating. LOL.
Author:  karenroller [ Sat Mar 08, 2014 4:03 am ]
Post subject:  Re: KK aftermarket parts/suppliers
JeepNCrowd wrote:
I think this thread needs some updating. LOL.


Yeah, I totally agreed. LOL.
Author:  KKnut [ Wed Mar 12, 2014 12:22 am ]
Post subject:  Re: KK aftermarket parts/suppliers
Ultimate KK steering rack support bracket: http://www.ultimatepowersteering.com.au ... -04-12-07/

(They got the years wrong, but probably fit KJ too?)
The rack mounts are increasingly failing at the pressed steel end here in oz. Obviously so many that these brackets are now being produced. Not cheap but ready to fit should you be looking for a long term solution. ImageImage

Pics of my damaged rack:
ImageImage
Author:  JeepMonkey190 [ Wed Mar 12, 2014 2:59 am ]
Post subject:  Re: KK aftermarket parts/suppliers
I think you forgot a certain someone on the bumper list that has been a game changer for a lot of us 8) But I didn't see AtTheHelm's Bumpers on the list :lol:

Also you can add JCR offroad for their rocksliders, http://www.jcroffroad.com

Also another is OLB (Offroad LED Bars) http://offroadledbars.com
Author:  dcbelcher26 [ Mon Oct 06, 2014 11:50 am ]
Post subject:  Re: KK aftermarket parts/suppliers
SOLID industry diff covers. they have the 8.25 and dana 30. $65 for a powder coated iron cover. May not be the best but for the price its hard to beat.
http://www.solidaxle.com/productcart/pc ... Category=7
Page 3 of 4 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/