LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

KK aftermarket parts/suppliers
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=39022
Page 4 of 4

Author:  nFodzy [ Mon Oct 06, 2014 8:49 pm ]
Post subject:  Re: KK aftermarket parts/suppliers

dcbelcher26 wrote:
SOLID industry diff covers. they have the 8.25 and dana 30. $65 for a powder coated iron cover. May not be the best but for the price its hard to beat.
http://www.solidaxle.com/productcart/pc ... Category=7


Interesting... I know a few other jeepers on jeepforum have these on their cherokee's. Not sure how they compare to ARB but you're right, the price is shocking and I'm pretty sure they have lifetime warranty.

Author:  dcbelcher26 [ Mon Oct 06, 2014 9:06 pm ]
Post subject:  Re: KK aftermarket parts/suppliers

nFodzy wrote:
dcbelcher26 wrote:
SOLID industry diff covers. they have the 8.25 and dana 30. $65 for a powder coated iron cover. May not be the best but for the price its hard to beat.
http://www.solidaxle.com/productcart/pc ... Category=7


Interesting... I know a few other jeepers on jeepforum have these on their cherokee's. Not sure how they compare to ARB but you're right, the price is shocking and I'm pretty sure they have lifetime warranty.

You're correct, they have a lifetime warranty. They withstand a shot from a 357 magnum. The .454 Casull (.44 magnum) round didn't go through but would cause a leak. I think its plenty strong. Heres a review site of different covers that they shot for a review. http://www.fourwheeler.com/how-to/trans ... roof-test/



Sent from my iPhone using Tapatalk

Author:  nFodzy [ Thu Apr 16, 2015 1:07 am ]
Post subject:  Re: KK aftermarket parts/suppliers

UPDATE:

The 8.25 Solid diff cover fits our KK's!

Image

Author:  John3:17 [ Thu Apr 16, 2015 1:13 am ]
Post subject:  Re: KK aftermarket parts/suppliers

dcbelcher26 wrote:
nFodzy wrote:
dcbelcher26 wrote:
SOLID industry diff covers. they have the 8.25 and dana 30. $65 for a powder coated iron cover. May not be the best but for the price its hard to beat.
http://www.solidaxle.com/productcart/pc ... Category=7


Interesting... I know a few other jeepers on jeepforum have these on their cherokee's. Not sure how they compare to ARB but you're right, the price is shocking and I'm pretty sure they have lifetime warranty.

You're correct, they have a lifetime warranty. They withstand a shot from a 357 magnum. The .454 Casull (.44 magnum) round didn't go through but would cause a leak. I think its plenty strong. Heres a review site of different covers that they shot for a review. http://www.fourwheeler.com/how-to/trans ... roof-test/



Sent from my iPhone using Tapatalk


The BDS Liberty spit a bolt out through one.

Author:  tommudd [ Thu Apr 16, 2015 10:41 am ]
Post subject:  Re: KK aftermarket parts/suppliers

John3:17 wrote:

The BDS Liberty spit a bolt out through one.



Image

Author:  John3:17 [ Thu Apr 16, 2015 10:45 am ]
Post subject:  Re: KK aftermarket parts/suppliers

tommudd wrote:
John3:17 wrote:

The BDS Liberty spit a bolt out through one.



Image


So it wasn't a "Solid" cover? I read that it was.

Very similar! And after doing a little searching on the Nitro cover it is aluminum.

Where's that crow at I'm hungry.

Author:  NAMoulton1 [ Fri Apr 17, 2015 2:10 pm ]
Post subject:  Re: KK aftermarket parts/suppliers

Is that a ring gear bolt? What else could be thrown out...

Author:  JeepMonkey190 [ Fri Apr 17, 2015 5:43 pm ]
Post subject:  Re: KK aftermarket parts/suppliers

John3:17 wrote:
tommudd wrote:
John3:17 wrote:

The BDS Liberty spit a bolt out through one.



Image


So it wasn't a "Solid" cover? I read that it was.

Very similar! And after doing a little searching on the Nitro cover it is aluminum.

Where's that crow at I'm hungry.



Well the good news is that you knew something was wrong and broken right away

Page 4 of 4 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/