zoomie wrote:
How about adding fog lights to the 2010 sport model?
Better late then never right
viewtopic.php?f=104&t=54379
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What would you like to see in the KK tech section http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=42165 |
Page 2 of 2 |
| Author: | Diggerfreek [ Tue Apr 20, 2010 12:50 am ] |
| Post subject: | Re: What would you like to see in the KK tech section |
MtnLuvr wrote: It would be nice to see some "how-to's" for resetting the wheel well fender flares after they get off one of their clips. This has happened to me multiple times on my rear flares (after wheelin') and looks like I've just had a front wheel well fender flare come off it frontmost clip. Photos would be great. I'm not certain, but IIRC, my dealer said you have to actually remove the entire wheel well fender flair and then reseat the entire thing. Yeah, you are going to have to pop the whole thing. I'll look in the FSM, but that might be a waste of time. Basically, the little clip is going to slide down in in the molded retainer on the flare. Let me look............ |
|
| Author: | zoomie [ Wed Jul 07, 2010 1:42 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
How about adding fog lights to the 2010 sport model? |
|
| Author: | Diggerfreek [ Sat Jul 10, 2010 8:31 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
zoomie wrote: How about adding fog lights to the 2010 sport model? I'll get those instructions posted up this weekend. |
|
| Author: | CORZO [ Mon Jul 19, 2010 3:58 am ] |
| Post subject: | Re: What would you like to see in the KK tech section |
Diggerfreek wrote: MtnLuvr wrote: It would be nice to see some "how-to's" for resetting the wheel well fender flares after they get off one of their clips. This has happened to me multiple times on my rear flares (after wheelin') and looks like I've just had a front wheel well fender flare come off it frontmost clip. Photos would be great. I'm not certain, but IIRC, my dealer said you have to actually remove the entire wheel well fender flair and then reseat the entire thing. Yeah, you are going to have to pop the whole thing. I'll look in the FSM, but that might be a waste of time. Basically, the little clip is going to slide down in in the molded retainer on the flare. Let me look............ A "how-to" for removal/installation of all the fender flares would be great. Photos of what a KK without flares looks like, as well, would be appreciated. Thanks in advance. |
|
| Author: | Diggerfreek [ Tue Jul 20, 2010 12:05 am ] |
| Post subject: | Re: What would you like to see in the KK tech section |
zoomie wrote: How about adding fog lights to the 2010 sport model? Better late then never right viewtopic.php?f=104&t=54379 |
|
| Author: | zoomie [ Mon Jul 26, 2010 1:34 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
Diggerfreek wrote: Better late then never right Always - thanks. |
|
| Author: | CORZO [ Sat Aug 07, 2010 6:55 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
A "how-to" for removal/installation of all the fender flares would be great. Photos of what a KK without flares looks like, as well, would be appreciated. Thanks in advance. |
|
| Author: | CORZO [ Sat Aug 21, 2010 4:32 am ] |
| Post subject: | Re: What would you like to see in the KK tech section |
Instructions on how to remove the shift knob on a 2008 Jeep KK with the six-speed manual, would also be of great help. |
|
| Author: | Diggerfreek [ Mon Sep 06, 2010 1:24 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
CORZO wrote: Instructions on how to remove the shift knob on a 2008 Jeep KK with the six-speed manual, would also be of great help. Just grab on to it and pull straight up. It will take some muscle! |
|
| Author: | Diggerfreek [ Mon Sep 06, 2010 1:24 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
Update to the TSB section coming soon!!!!!!!! 
|
|
| Author: | CaterpillarDR [ Sat Sep 25, 2010 1:33 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
As with any new model, aftermarket parts become more and more available. It would be great for members to post sites that they have ordered parts from and give a quick note to what they ordered, why they ordered from that site and maybe some tips on installation, issues they ran into etc... |
|
| Author: | CORZO [ Mon Oct 18, 2010 4:25 am ] |
| Post subject: | Re: What would you like to see in the KK tech section |
Diggerfreek wrote: CORZO wrote: Instructions on how to remove the shift knob on a 2008 Jeep KK with the six-speed manual, would also be of great help. Just grab on to it and pull straight up. It will take some muscle! Diggerfreek, is the shifter knob going to come loose as one piece from the bottom or will it split at the center seam? |
|
| Author: | Diggerfreek [ Mon Oct 18, 2010 8:00 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
CORZO wrote: Diggerfreek wrote: CORZO wrote: Instructions on how to remove the shift knob on a 2008 Jeep KK with the six-speed manual, would also be of great help. Just grab on to it and pull straight up. It will take some muscle! Diggerfreek, is the shifter knob going to come loose as one piece from the bottom or will it split at the center seam? It will come up as one piece. |
|
| Author: | Ozzi [ Mon Oct 22, 2012 5:58 am ] |
| Post subject: | Re: What would you like to see in the KK tech section |
List of sites or shops in America where spare parts can be purchased. I am in Australia and Jeep here don't hold much spares, even if they do they usually are 2-3 times the cost in US. |
|
| Author: | Katmandu [ Sat Nov 16, 2013 2:25 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
I would like to see a How-To Video on Front Strut replacement. I've searched all over YouTube and come up empty. Tons for the rears (no brainer), but nothing for the fronts. |
|
| Author: | brunolambert [ Sat Nov 16, 2013 8:42 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
Katmandu wrote: I would like to see a How-To Video on Front Strut replacement. I've searched all over YouTube and come up empty. Tons for the rears (no brainer), but nothing for the fronts. Ever looked at lift howto? it's all strut afterall. |
|
| Author: | sammymagoo [ Tue Dec 17, 2013 11:37 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
How to remove dash for vent/mode door repair and heater core replacement. |
|
| Author: | bwsooner6 [ Sat Dec 21, 2013 2:53 pm ] |
| Post subject: | Re: What would you like to see in the KK tech section |
Maybe a sticky titled "mods" and in the thread short cut links to the all great mods this forum offers. Sent from my iPhone using Tapatalk |
|
| Author: | greatoppressor [ Thu Apr 17, 2014 9:29 am ] |
| Post subject: | Re: What would you like to see in the KK tech section |
sammymagoo wrote: How to remove dash for vent/mode door repair and heater core replacement. Second this one; It looks like this may end up being a common issue for the KK as they start to accumulate sufficient time/miles. -SR- |
|
| Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|