LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

HOW TO: Manual Transmission Oil Change
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=44766		 Page 1 of 1
Author:  Diggerfreek [ Sun Jul 05, 2009 4:26 pm ]
Post subject:  HOW TO: Manual Transmission Oil Change
Remove drain plug (1) and drain fluid.
Image


Install drain plug and remove fill plug .
Image


Fill transmission with 1.5 L (3.17 pts.) of Mopar® Manual Transmission Lubricant MS-9224 or any Syncromesh type fluid to the bottom of the fill plug hole.
Author:  infernicus [ Sat Nov 21, 2009 4:56 pm ]
Post subject: 
Quick Question:
I know the drain Plug is 17mm, but it appears the fill plug is a different size.. any idea what that might be?
Thanks in advance..
Author:  Diggerfreek [ Sat Nov 21, 2009 7:43 pm ]
Post subject: 
Sorry, but I don't remember :oops: I'll go take a look in a few.....
Author:  infernicus [ Sat Nov 21, 2009 11:56 pm ]
Post subject: 
Cool thanks.. I bought some 17mm screws and such for under three bucks and I went to go change it today, and before opening the drain, I was like, lemme check out the fill, lol.. And of course it didn't fit.. I didn't have a hex key big enough, so of course I searched here for a while, and no luck.. But of course,
**cue theme music** Digger the the rescue! Haha. Anyway, I guess tomorrow I'll head out and buy what I need.
Thanks, Dean.
Author:  infernicus [ Sun Nov 22, 2009 6:36 pm ]
Post subject: 
Heyyyy, so, the Fill Plug is 14mm, and the Drain Plug is 17mm.
Autozone has a three piece set of the correct hex bolts for a 1/2 driver, for like 12 bucks. Good to have around.
Author:  Diggerfreek [ Sun Nov 22, 2009 7:16 pm ]
Post subject: 
Thanks for the added info! :P
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/