| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 30" Nitto's + 2" lift kit. Will tires rub?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=61497 |
Page 1 of 1 |
| Author: | Fredy [ Mon Jul 04, 2011 12:15 am ] |
| Post subject: | 30" Nitto's + 2" lift kit. Will tires rub?? |
Hello, New on the forum here, Great Forum BTW. Just purchased an '08 KK Limited with the 18" wheels. Looking to put on some 30" Nitto Terra Grapplers(255/60R18) and was wondering if a 2" lift would be enough to keep the tires from rubbing at any angle? Any feedback would be appreciated. Been searching the forum but no luck with my specifics. TIA, Fredy |
|
| Author: | DirtyKK [ Mon Jul 04, 2011 2:04 am ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
you should be ok. i had 31x10.5 with about 2" of lift and it barely kissed the pinch weld in reverse only. |
|
| Author: | Fredy [ Mon Jul 04, 2011 4:09 pm ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
DirtyKK, Thanks. I wonder if they will rub at full flex? Fredy |
|
| Author: | DirtyKK [ Mon Jul 04, 2011 4:42 pm ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
i did lots of wheeling with that setup and it still only rubbed the pinch weld a little because the front doesnt really have that much travel. pound back the pinch weld and heat up the plastic to push it back and reform it and it wont ever touch. |
|
| Author: | musclezmarinara [ Tue Dec 20, 2011 12:12 am ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
So i can do 30s on my kk with say an OME 1.5" which really is a 2 ish inch? Any advice on tires that will be quiet as a DD mounted to my 16 oems |
|
| Author: | Fredy [ Tue Dec 20, 2011 12:32 am ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
I installed the spacers and tires about 1 month ago. Everything is working fine. The inside of the tire walls do rub the sway bar only at full lock. The wife is happy with her new ride. Fredy |
|
| Author: | musclezmarinara [ Tue Dec 20, 2011 10:56 pm ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
Im wondering if a 275 70 will rub on my OME lift with oem 16s |
|
| Author: | Fredy [ Tue Dec 20, 2011 11:15 pm ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
http://www.discounttire.com/dtcs/infoTireMath.dos You are going to be running a 31.16" tall tire. You will have minor rubbing according to the replies on this thread from Dirty "you should be ok. i had 31x10.5 with about 2" of lift and it barely kissed the pinch weld in reverse only" Fredy |
|
| Author: | musclezmarinara [ Tue Dec 20, 2011 11:23 pm ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
Fredy wrote: http://www.discounttire.com/dtcs/infoTireMath.dos You are going to be running a 31.16" tall tire. You will have minor rubbing according to the replies on this thread from Dirty "you should be ok. i had 31x10.5 with about 2" of lift and it barely kissed the pinch weld in reverse only" Fredy So the oem 16s would be fine with a 275 70 16? or what size is a 31. |
|
| Author: | Fredy [ Tue Dec 20, 2011 11:28 pm ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
You should be fine. Look up "pinch weld" you might have to modify it if you get a little rub. |
|
| Author: | DirtyKK [ Wed Dec 21, 2011 12:35 am ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
i had different width and offset rims then oem. you will have rub with 275 on an oem rim. |
|
| Author: | Fredy [ Wed Dec 21, 2011 12:40 am ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
DirtyKK wrote: i had different width and offset rims then oem. you will have rub with 275 on an oem rim. Thanks for chimming in, you would know best. Fredy |
|
| Author: | black and blue [ Thu Jan 05, 2012 6:14 pm ] |
| Post subject: | Re: 30" Nitto's + 2" lift kit. Will tires rub?? |
you will definitely rub with the 275/70R16 I run the Nitto Terra Grappler 255/70R17, smaller radius and width than the 275/70R16, with my OME lift and I've got a decent amount of rubbing. Pounded the pinch weld and removed/reformed a significant amount of the front side of the wheel well to minimize the rubbing |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|