i didnt have bump stops on mine. go flex it out and see if it rubs.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Bump stops with 2" lift? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=70139 |
Page 1 of 1 |
| Author: | JeepNCrowd [ Wed Aug 15, 2012 8:49 pm ] |
| Post subject: | Bump stops with 2" lift? |
I have the 2' Daystar and am about to upgrade to the 245/75-16 Duratracs. Will I need bigger bump stops or should it not make to much of a difference? |
|
| Author: | DirtyKK [ Wed Aug 15, 2012 9:31 pm ] |
| Post subject: | Re: Bump stops with 2" lift? |
i didnt have bump stops on mine. go flex it out and see if it rubs.
|
|
| Author: | cgass [ Wed Aug 15, 2012 10:10 pm ] |
| Post subject: | Re: Bump stops with 2" lift? |
I have a 2.5" OME lift with 225/75/16 and stock bump stops. I've flexed both front and rear out fully without any rubbing. I have about a half inch between the tire and fender at full flex. I would think with the 245/75/16 you would kiss the fenders. Sent from my Galaxy Nexus using Tapatalk 2 |
|
| Author: | tommudd [ Fri Aug 17, 2012 8:56 am ] |
| Post subject: | Re: Bump stops with 2" lift? |
Bump stops are not just for making sure tires do not hit the fenders They also limit travel so you do not stack your springs or over compress your shocks |
|
| Author: | At The Helm [ Fri Aug 17, 2012 1:14 pm ] |
| Post subject: | Re: Bump stops with 2" lift? |
Front bumpstops are important too... I filled in my rear spacers with plywood rounds and sealed it all with rtv. Why they make them hollow i don't know.  Hard to see it in the pic but look closely at the bottom spacer. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|