LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Front Bumper ideas
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=71821		 Page 1 of 1
Author:  Pats Jeep for life [ Sat Sep 29, 2012 1:21 pm ]
Post subject:  Front Bumper ideas
Looking for some front bumper ideas I have notice there is nothing after market for the 2008 Liberty.

Thanks
Author:  tommudd [ Sat Sep 29, 2012 3:01 pm ]
Post subject:  Re: Front Bumper ideas
There are some out there
or coming up soon
just need to look :wink:
Author:  lfhoward [ Sat Sep 29, 2012 3:06 pm ]
Post subject:  Re: Front Bumper ideas
There are a few aftermarket KK bumper options, but they are not as readily available as KJ bumpers. These are the options I know about:
1. Rock Lizard Fabrications designed a KK bumper, but is behind in bumper production at the moment and might not take new orders until they catch up with current demand.
2. MtnLuvr designed a custom bumper and produced a couple. From what I understand he would like to sell his bumpers eventually but is not taking any orders at the moment.
3. Atthehelm recently produced a couple of winch bumpers for the KK and is interested in making a few more. He is based out of Lake Tahoe.
4. Learn how to weld and fabricate your own custom bumper. Several people on here have done/are thinking about doing this.
Searching around the forum will get you info on all of the above. Good luck!
Author:  Pats Jeep for life [ Sun Sep 30, 2012 12:31 am ]
Post subject:  Re: Front Bumper ideas
Ok thank you
Author:  Ted15 [ Sun Sep 30, 2012 8:31 am ]
Post subject:  Re: Front Bumper ideas
lfhoward wrote:
There are a few aftermarket KK bumper options, but they are not as readily available as KJ bumpers. These are the options I know about:
1. Rock Lizard Fabrications designed a KK bumper, but is behind in bumper production at the moment and might not take new orders until they catch up with current demand.
2. MtnLuvr designed a custom bumper and produced a couple. From what I understand he would like to sell his bumpers eventually but is not taking any orders at the moment.
3. Atthehelm recently produced a couple of winch bumpers for the KK and is interested in making a few more. He is based out of Lake Tahoe.
4. Learn how to weld and fabricate your own custom bumper. Several people on here have done/are thinking about doing this.
Searching around the forum will get you info on all of the above. Good luck!


Another option, look in your area for custom fabricators with good a reputation. Local Offroad clubs may be a good source for info but make sure you look at their work first, there are also a lot of hacks out there.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/