LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

2008 Jeep Liberty KK Front Suspension Torque Specifications
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=71909		 Page 1 of 1
Author:  Tigger0612 [ Sat Oct 06, 2012 7:46 pm ]
Post subject:  2008 Jeep Liberty KK Front Suspension Torque Specifications
Hello fellow Jeepers!

Haven't sprung for a set of service manuals yet for my 2008 Jeep Liberty KK and I'm looking for torque specifications, specific to the front suspension components ( but any additional torque specs would always be useful :D ). I've got some clicking and clunking starting up (80,000 miles) figure I'll be changing out my Upper control arms, and upper & lower ball joints. Also gonna replace the strut shocks and bearing plates while it's apart, so the torques for the strut, Clevis bracket, strut rod, etc.

Everything I've come across on the Internet so far has been for the KA, and what I've seen so far, the specs aren't the same for the KK.

Thanks in advance for any help provided!

1994 Jeep Grand Cherokee ZJ
1998 Jeep Cherokk XJ
2008 Jeep Liberty KK
Author:  Ted15 [ Sat Oct 06, 2012 7:57 pm ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
Tigger0612 wrote:
Hello fellow Jeepers!

Haven't sprung for a set of service manuals yet for my 2008 Jeep Liberty KK and I'm looking for torque specifications, specific to the front suspension components ( but any additional torque specs would always be useful :D ). I've got some clicking and clunking starting up (80,000 miles) figure I'll be changing out my Upper control arms, and upper & lower ball joints. Also gonna replace the strut shocks and bearing plates while it's apart, so the torques for the strut, Clevis bracket, strut rod, etc.

Everything I've come across on the Internet so far has been for the KA, and what I've seen so far, the specs aren't the same for the KK.

Thanks in advance for any help provided!

1994 Jeep Grand Cherokee ZJ
1998 Jeep Cherokk XJ
2008 Jeep Liberty KK


Try this
http://en.m.wikibooks.org/wiki/Jeep_Lib ... et_Sizes#_
Author:  Cherrie 274 [ Sat Oct 06, 2012 8:06 pm ]
Post subject:  2008 Jeep Liberty KK Front Suspension Torque Specifications
Or check out Clevis lift right here. Or torque specs.
Author:  Tigger0612 [ Sat Oct 06, 2012 8:10 pm ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
Thanks for the quick reply Ted15!

I saw that link online that you sent, but from some other readings, it doesn't match up to the 2008. I don't have all of the specs, but on this link: http://www.brakeandfrontend.com/issue/article.aspx?contentid=79734
It gives a warning about the torque specs for the 08-10 KK because of possible damage to the aluminum Front knuckles.

Take a look.

Again. Appreciate the help!
Author:  Tigger0612 [ Tue Oct 09, 2012 8:22 am ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
Still looking if anyone has anything to add SPECIFIC to th 2008 + model year KK torque specs. Thanks in advance for any help you can offer.

-T
Author:  Ted15 [ Tue Oct 09, 2012 8:37 am ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
Those two references are very contradictive. I would think that after torquing to 30 lbft then turning an additional 90 deg that it would be close to the 60 lbft that the other reference calls for. I have a call out to the dealer for the specs, we'll see if they'll give them to me.
Author:  Tigger0612 [ Tue Oct 09, 2012 8:43 am ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
Thanks Ted!!! you know I didn't even think about the dealer possibly giving out the specs for free. Figure it's one of the few things that they can keep to themselves for business reasons. I appreciate the help!
Author:  Ted15 [ Tue Oct 09, 2012 8:54 am ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
Tigger0612 wrote:
Thanks Ted!!! you know I didn't even think about the dealer possibly giving out the specs for free. Figure it's one of the few things that they can keep to themselves for business reasons. I appreciate the help!


Ya never know, they'll probably tell me to bring it in if I'm having trouble. I've never had more problems finding information about vehicle repairs than I've had with this model. Chitons still doesn't even have a manual for it yet and they've already stopped making it. Haynes doesn't have one either. I have something on a CDROM but my compuker took a crap.
Author:  Tigger0612 [ Sun Oct 14, 2012 8:47 pm ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
Ok... So here it is... Official from the Dealer specs (I'm on "the in" now with Repair instructions, TSBs, specs..etc :BANANA: )

I haven't figured out how to add a photo yet since I'm a fairly new member, so I'm manually typing it all out:

2008 Jeep Liberty KK
Front Suspension Torque Settings

•Frt Shock Absorber Clevis Bracket Upper Nut 108N•m (80Ft.Lbs)
•Frt Shock Absorber Clevis Bracket Lower Nut 150N•m (110Ft.Lbs)
•Frt Shock Absorber Top(4) Mounting Nuts 108N•m (80Ft.Lbs)
•Frt Shock to Spring and Insulator Nut 41N•m (30Ft.Lbs)
•Upper Suspension Arm Front Nut 122N•m (90Ft.Lbs)
•Upper Suspension Arm Rear Nut 122N•m (90Ft.Lbs)
•Lower Suspension Arm Front Nut 170N•m (125Ft.Lbs)
•Lower Suspension Arm Rear Nut 170N•m (125Ft.Lbs)
•Stabilizer Bar Clamp Nut 149N•m (110Ft.Lbs)
•Stabilzer Bar Link Upper Nut 115N•m (85Ft.Lbs)
•Stabilzer Bar Link Lower Bolt 102N•m (75Ft.Lbs)
•Hub/Bearing Bolt 130N•m (96Ft.Lbs)
•Hub/Bearing Halfshaft Nut 136N•m (100Ft.Lbs)
•Upper Ball Joint Nut tighten to 41N•m (30Ft.Lbs) and rotate nut an additional 90deg.
•Lower Ball Joint Nut tighten to 54N•m (40Ft.Lbs) and rotate nut an additional 90deg.
•Outer Tie Rod End Nut to Knuckle 41N•m (30Ft.Lbs) and rotate nut an additional 90deg.
•Wheel Speed Sensor 13.5N•m (10Ft.Lbs)
Author:  Ted15 [ Sun Oct 14, 2012 10:49 pm ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
Tigger0612 wrote:
Ok... So here it is... Official from the Dealer specs (I'm on "the in" now with Repair instructions, TSBs, specs..etc :BANANA: )

I haven't figured out how to add a photo yet since I'm a fairly new member, so I'm manually typing it all out:

2008 Jeep Liberty KK
Front Suspension Torque Settings

•Frt Shock Absorber Clevis Bracket Upper Nut 108N•m (80Ft.Lbs)
•Frt Shock Absorber Clevis Bracket Lower Nut 150N•m (110Ft.Lbs)
•Frt Shock Absorber Top(4) Mounting Nuts 108N•m (80Ft.Lbs)
•Frt Shock to Spring and Insulator Nut 41N•m (30Ft.Lbs)
•Upper Suspension Arm Front Nut 122N•m (90Ft.Lbs)
•Upper Suspension Arm Rear Nut 122N•m (90Ft.Lbs)
•Lower Suspension Arm Front Nut 170N•m (125Ft.Lbs)
•Lower Suspension Arm Rear Nut 170N•m (125Ft.Lbs)
•Stabilizer Bar Clamp Nut 149N•m (110Ft.Lbs)
•Stabilzer Bar Link Upper Nut 115N•m (85Ft.Lbs)
•Stabilzer Bar Link Lower Bolt 102N•m (75Ft.Lbs)
•Hub/Bearing Bolt 130N•m (96Ft.Lbs)
•Hub/Bearing Halfshaft Nut 136N•m (100Ft.Lbs)
•Upper Ball Joint Nut tighten to 41N•m (30Ft.Lbs) and rotate nut an additional 90deg.
•Lower Ball Joint Nut tighten to 54N•m (40Ft.Lbs) and rotate nut an additional 90deg.
•Outer Tie Rod End Nut to Knuckle 41N•m (30Ft.Lbs) and rotate nut an additional 90deg.
•Wheel Speed Sensor 13.5N•m (10Ft.Lbs)


How'd ya manage that?
Author:  Tigger0612 [ Mon Oct 15, 2012 8:38 am ]
Post subject:  Re: 2008 Jeep Liberty KK Front Suspension Torque Specificati
An engineer friend of mine who works for Chrysler.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/