another bothering lift question

jckobo · **Posted:** Tue Mar 17, 2015 10:02 pm

Want more lift then the daystar. So..if i go w ome springs i still want more. So can i keep the spacers and add springs and do upper control arms???

I have loger shocks already. I dont have a lot of cash either

Bmxer524 · **Posted:** Tue Mar 17, 2015 10:16 pm

Springs and daystar will give too much lift. Ditch the daystar get OME springs, 1/2" top plate, 3/8" clevis, upper a-arms and 4 extra rear upper spring isolators(stack 2 per side).

That'll get you a cool 3.5" of lift.

Honestly, if you have shocks already then the a-arms(which will be needed after 3") and springs are your big money items.

You could do it in stages if you don't have the money all at once. Get the OME springs and top plate. Install those in front, in the rear install the OME springs and 1 extra iso per side. That'll be 3" of lift. Then when you have the money do the clevis and install the a-arms, then add the 2nd extra iso per side for the 3.5"/

tommudd · **Posted:** Tue Mar 17, 2015 10:24 pm

What he said ^^^^^
With springs and spacer you'd have over or about 5 inches of lift and all sorts of issues . Look good sitting in the yard but thats it
Stick with 3.25-3.5 inches and be done

jckobo · **Posted:** Tue Mar 17, 2015 10:45 pm

Ok thanks guys. Anywhere u can order all the parts at 1 time. And any good mechanic to install near south jersey

jckobo · **Posted:** Tue Mar 17, 2015 11:44 pm

And reading ome site. Springs only lift 1.5 inches

tommudd · **Posted:** Tue Mar 17, 2015 11:45 pm

jckobo wrote:

Ok thanks guys. Anywhere u can order all the parts at 1 time. And any good mechanic to install near south jersey

http://www.jeepinbyal.com
OME/ Ironman/ TM Econo lift/ JBA adjustable all right there, one stop shopping

tommudd · **Posted:** Tue Mar 17, 2015 11:46 pm

jckobo wrote:

And reading ome site. Springs only lift 1.5 inches

Advertised height for Australia due to insurance reason
OME gets you 2.5 inches of lift
Read through the 1000s of posts on here, you'll see that what everyone gets

Bmxer524 · **Posted:** Wed Mar 18, 2015 2:02 am

927/731 combo gets 2.5". I'd try talking to Gage and the other NJ guys. If you have tools and any mechanical skill you can do it in your driveway if need be.

dcbelcher26 · **Posted:** Wed Mar 18, 2015 2:05 am

I should be doing my lift next weekend if all goes well. Ill report back to let you know how it goes

Sent from my iPhone using Tapatalk

Gageraid · **Posted:** Thu Mar 19, 2015 9:56 am

Bmxer524 wrote:

927/731 combo gets 2.5". I'd try talking to Gage and the other NJ guys. If you have tools and any mechanical skill you can do it in your driveway if need be.

Yup, that's correct.
There should be some shops in South Jersey. I used to live there, but can't remember any. Everyone has a lifted truck in South Jersey, so I'd imagine somewhere could install the lift if you can't yourself.

dcbelcher26 · **Posted:** Thu Mar 19, 2015 10:03 am

Gageraid wrote:

Bmxer524 wrote:

927/731 combo gets 2.5". I'd try talking to Gage and the other NJ guys. If you have tools and any mechanical skill you can do it in your driveway if need be.

Yup, that's correct.
There should be some shops in South Jersey. I used to live there, but can't remember any. Everyone has a lifted truck in South Jersey, so I'd imagine somewhere could install the lift if you can't yourself.

http://www.800-923-jeep.com
Not sure where you are but this guy is in new egypt. Working only on jeeps. Granted hell laugh when you say a liberty but i think hell still work on it

Sent from my iPhone using Tapatalk

tommudd · **Posted:** Thu Mar 19, 2015 11:10 am

Easy to do yourself with a good basic set of tools.
I've walked many people through it over the phine on a Saturday afternoon. :lol:

Plus have had people I helped install theirs, maybe some over there close by that could help you install yours.
Its certainly not rocket science and only takes a few hours

another bothering lift question

Who is online