| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Window Controls http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=81833 |
Page 1 of 2 |
| Author: | brdkey [ Tue Apr 14, 2015 11:15 am ] |
| Post subject: | Window Controls |
It finally happened I broken my window switch. It's been on the verge of breaking forever now. Does anyone have one they wanna sell me? Also does anyone know how to remove and replace this? I may could just purchase a button, anyone else have this problem?   
|
|
| Author: | NAMoulton1 [ Tue Apr 14, 2015 12:51 pm ] |
| Post subject: | Re: Window Controls |
I'm pretty sure lfhoward just replaced his. He'll show up eventually and have a part number I bet haha. EDIT: Found his thread - viewtopic.php?f=88&t=81521&p=860133#p860133 |
|
| Author: | brdkey [ Tue Apr 14, 2015 3:30 pm ] |
| Post subject: | Re: Window Controls |
Lol |
|
| Author: | brdkey [ Tue Apr 14, 2015 3:30 pm ] |
| Post subject: | Re: Window Controls |
I think I just need the one plastic switch |
|
| Author: | NAMoulton1 [ Tue Apr 14, 2015 5:18 pm ] |
| Post subject: | Re: Window Controls |
Have to buy everything as one unit...MOPAR doesn't sell single switches... |
|
| Author: | brdkey [ Tue Apr 14, 2015 8:18 pm ] |
| Post subject: | Re: Window Controls |
Dang. Well it works if I use a pocket knife lol |
|
| Author: | lfhoward [ Tue Apr 14, 2015 9:34 pm ] |
| Post subject: | Re: Window Controls |
NAMoulton1 wrote: I'm pretty sure lfhoward just replaced his. He'll show up eventually and have a part number I bet haha. EDIT: Found his thread - viewtopic.php?f=88&t=81521&p=860133#p860133  Yes, I just swapped mine out with a switch bank from a junkyard. I still have the old switch bank if you want to try to do a button transplant. My driver's window switch didn't work electronically (the window didn't go when you pressed the button), but physically the button was fine. You can just pull up on the switches and the unit should disengage from the door. Then you can undo the wire harnesses underneath. No need to disassemble the door. |
|
| Author: | brdkey [ Tue Apr 14, 2015 10:30 pm ] |
| Post subject: | Re: Window Controls |
Ok. How would I get the a button from you? |
|
| Author: | lfhoward [ Tue Apr 14, 2015 11:02 pm ] |
| Post subject: | Re: Window Controls |
brdkey wrote: Ok. How would I get the a button from you? PM-ed. |
|
| Author: | brdkey [ Mon Aug 24, 2015 10:49 pm ] |
| Post subject: | Re: Window Controls |
Well the switch controls actually worked good for a while until I let a little rain in with the jeep door open while working on my jeep. I tried to make a Frankenstein one from the two but it broke quickly. Any ideas? |
|
| Author: | lfhoward [ Wed Aug 26, 2015 10:45 pm ] |
| Post subject: | Re: Window Controls |
Too bad it wasn't possible to combine parts from the two modules. At this point, I'd say a junkyard is the place to get one (I paid $45). I've looked on several parts sites for you, Including Rock Auto, Napa, and Advance Auto Parts, and nobody seems to have the drivers door switch (although the passenger's and rear door switches are available). So, maybe you could fine a low mileage Liberty, Nitro, or other compatible Chrysler product from 2008 and grab a door switch module. The junkyard I dealt with had several in stock, and they let me try a few to make sure I got one that worked. |
|
| Author: | Bmxer524 [ Tue Sep 01, 2015 7:03 pm ] |
| Post subject: | Re: Window Controls |
Lauren, did you try dealers for the part? My switch is getting really bad lately and I need to start looking for one. A few of them around here are going for $60+. Honestly if new is just a bit more, I'd rather go that route... |
|
| Author: | lfhoward [ Tue Sep 01, 2015 7:35 pm ] |
| Post subject: | Re: Window Controls |
Bmxer524 wrote: Lauren, did you try dealers for the part? My switch is getting really bad lately and I need to start looking for one. A few of them around here are going for $60+. Honestly if new is just a bit more, I'd rather go that route... $60 sounds reasonable for the part. When I was looking, I seem to remember it was $150+ for the drivers side switch module, so I thought my $45 junkyard price was a good deal. But if you can get new Mopar for $60, that sounds like the way to go! |
|
| Author: | Bmxer524 [ Tue Sep 01, 2015 11:20 pm ] |
| Post subject: | Re: Window Controls |
I'll have to look. The junkyards are asking about $60. I'll have to call the dealer or see if I can find it new somewhere else. |
|
| Author: | CollinKK [ Fri Sep 04, 2015 7:40 am ] |
| Post subject: | Re: Window Controls |
I grabbed my drivers side replacement off eBay. I think it was around 50$ shipped. Sent from my VS880 using Tapatalk |
|
| Author: | brdkey [ Mon Sep 07, 2015 2:06 pm ] |
| Post subject: | Re: Window Controls |
Just let me know what y'all find Sent from my LGLS991 using Tapatalk |
|
| Author: | PALiftedKK [ Mon Sep 07, 2015 2:20 pm ] |
| Post subject: | Re: Window Controls |
seems to be a common issue with the nitro and liberty switches... just cough up the 60 bucks or buy new for 80... 
|
|
| Author: | Bmxer524 [ Mon Sep 07, 2015 7:59 pm ] |
| Post subject: | Re: Window Controls |
From what my 5 min of searching found was new is about $100-110... |
|
| Author: | PALiftedKK [ Mon Sep 07, 2015 8:55 pm ] |
| Post subject: | Re: Window Controls |
http://www.amazon.com/gp/product/B00FZHFNPU/ref=s9_simh_gw_p263_d0_i5?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=desktop-2&pf_rd_r=1TACNQR19ZJTPW4D5XDH&pf_rd_t=36701&pf_rd_p=2091268722&pf_rd_i=desktop |
|
| Author: | Bmxer524 [ Mon Sep 07, 2015 10:30 pm ] |
| Post subject: | Re: Window Controls |
PALiftedKK wrote:  I'll be ordering by tomorrow!Thank you! |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|