Bored i sat in my jeep, looking at JeepNCrowd's idea of the small cubby on the dash i thought whats behind the map light, seen CB's mounted there so lets see.
I ran simple covered toggles and decided to add indicator lights.

The mount for the light was trimmed with a speed bit dermal.

Then each switch gets its own light.


I took down the visor, ran four wires
One to a key on power the others out to under the hood.

In my hast i didn't mark my wires, once the key power was hooked up i figured each wire and tied in the indicator lights.

Once all the wires and switches were wired up i put in a circuit breaker and ran three relays. Its crude but works.

Finished product



Enjoy this option and be creative with dead space!
Jeep On!



Sent from my moderately smart iPhone using Tapatalk

_________________
2012 Jeep Liberty Latitude
Jet stage 1
full K&N 77-1562KTK fiberglass wrapped
AirAid TB spacer
4.7 TB
single magna flow
Many mods shared here

Creative! I sadly use that spot for holding papers every now and then (and I already started placing switches in other spots). Looks just like a sky slider's overhead, except we have the switch.

_________________
2011 Deep Cherry Red KK - Skyslider - JBA/Bilstein Adjust-A-Strut set at 3.5" - OME 731 Rear Springs - Bilstein Rear Shocks - Al's A-arms - 245/75-16 Duratracs - Rock Liazard Super Sliders

Nice build! I've actually got a 2008 kk that doesn't have as many fun options on its map lights nor space to place extras.

I'll be looking to utilize that space on the dash

Sent from my HTC One M9 using Tapatalk

_________________
2008 Black Liberty Sport 4X4 - Red and Black wheels and trim - Painted headlight bezels - Magnaflow Exhaust.