LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Hyper flashing with load equalizer http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=85924 |
Page 1 of 1 |
Author: | davinhd [ Wed Jan 04, 2017 3:14 pm ] |
Post subject: | Hyper flashing with load equalizer |
Have LED on all signal lights and a load equalizer on each individual light. The passenger rear light keeps setting off hyper flash. Will last then back to regular. Put a regular bulb and no issues, changed the load equalizer in the rear passenger light and still having problem. I have read the gauges control the flasher, is it due to being the furthest from the computer? Could i just double the load equalizer on that light to minimize the voltage going back to the front? Any one have a fix or run into this problem Sent from my iPhone using Tapatalk |
Author: | davinhd [ Thu Jan 12, 2017 10:56 pm ] |
Post subject: | Re: Hyper flashing with load equalizer |
Even have two now and still hyper flash. What am i missing? [POUTING FACE] Sent from my iPhone using Tapatalk |
Author: | WWDiesel [ Fri Jan 13, 2017 11:54 am ] |
Post subject: | Re: Hyper flashing with load equalizer |
davinhd wrote: Even have two now and still hyper flash. What am i missing? [POUTING FACE] See this thread; a cleaner way... viewtopic.php?f=3&t=77241&p=904443&hilit=LED+turn#p904443 |
Author: | davinhd [ Fri Jul 14, 2017 10:03 pm ] |
Post subject: | Re: Hyper flashing with load equalizer |
I will check that out. I read the since the solid state turn signal lights dont have triditional relays the store bought 6ohm dont work but the old ceramic 20ohm do. Thanks Sent from my iPhone using Tapatalk |
Author: | davinhd [ Mon Jul 31, 2017 6:18 pm ] |
Post subject: | Re: Hyper flashing with load equalizer |
i dont have that behind the emergency flashers. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |