http://car-part.com/
Found one 21 miles away from the zip you posted for $35. But the description says it "LOOKS GOOD".
How do you check if a BJ is good off the vehicle??
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| needed- upper left a-arm http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=113&t=44666 |
Page 1 of 1 |
| Author: | RAYMAN975 [ Wed Jul 01, 2009 12:26 pm ] |
| Post subject: | needed- upper left a-arm |
does anybody within an hour or 2 drive from Macedonia ohio, 44056, have a OEM upper left A-arm in good condition, maybe someone who upgraded to AL's arms? mine just broke and need one ASAP before this weekend, but dont want to buy a new one from the dealer or napa because im going to be upgrading to AL's arms, i just need my jeep for this weekend and need a working a-arm thanks, Ray |
|
| Author: | jeepkj02 [ Wed Jul 01, 2009 12:47 pm ] |
| Post subject: | |
http://car-part.com/ Found one 21 miles away from the zip you posted for $35. But the description says it "LOOKS GOOD".
How do you check if a BJ is good off the vehicle?? |
|
| Author: | 03CDKJ [ Wed Jul 01, 2009 1:00 pm ] |
| Post subject: | Re: needed- upper left a-arm |
RAYMAN975 wrote: does anybody within an hour or 2 drive from Macedonia ohio, 44056, have a OEM upper left A-arm in good condition, maybe someone who upgraded to AL's arms? mine just broke and need one ASAP before this weekend, but dont want to buy a new one from the dealer or napa because im going to be upgrading to AL's arms, i just need my jeep for this weekend and need a working a-arm
thanks, Ray What broke... We need pics.... 
|
|
| Author: | RAYMAN975 [ Wed Jul 01, 2009 1:14 pm ] |
| Post subject: | |
it didnt break yet, but its on its last leg, its really wobbly, like a bobblehead i know Tom had a few sets of arms, or at least a few arms, but hes not home! is he?
|
|
| Author: | 03CDKJ [ Wed Jul 01, 2009 1:15 pm ] |
| Post subject: | |
RAYMAN975 wrote: it didnt break yet, but its on its last leg, its really wobbly, like a bobblehead
So the ARM didn't break... It's the Ball Joint going out??? I have my stock set in the garage if you need one of them....
|
|
| Author: | 03CDKJ [ Wed Jul 01, 2009 1:17 pm ] |
| Post subject: | |
oh and Mudd is still out of the country.... |
|
| Author: | RAYMAN975 [ Wed Jul 01, 2009 1:55 pm ] |
| Post subject: | |
arent you living up in toledo now chris? what condition were your arms in? were they loose at all? |
|
| Author: | 03CDKJ [ Wed Jul 01, 2009 2:00 pm ] |
| Post subject: | |
RAYMAN975 wrote: arent you living up in toledo now chris? what condition were your arms in? were they loose at all?
no I'm down near LIMA..... I'm pretty sure they are OKAY.... They are definately better than your BOBBLEHEAD ones....
|
|
| Author: | jeepkj02 [ Wed Jul 01, 2009 4:14 pm ] |
| Post subject: | |
Be careful! Don't be driving on those control arms long distance on HWY speeds! |
|
| Author: | RAYMAN975 [ Wed Jul 01, 2009 7:22 pm ] |
| Post subject: | |
oh dont worry, i wasnt going to drive it 10 feet, that thing was bad! i just finished fixing it. i went to a junkyard down in massilon and got a upper control arm for 35 bucks, all fixed! much much nicer shape than my old one. much tighter steering, now when i turn my wheel on the highway or around town, my jeep actually turns instead of slop. I'm still getting the upper control arms from www.jeepinbyal.com .but they can wait a little bit until i can afford them. now that my jeep is safe to drive again. the passenger one i got replaced under warranty with a mopar brand new unit, about 6 months ago. i got the extended warranty when i got my jeep used. but this time around i couldnt do that because it expired |
|
| Author: | Guest [ Wed Jul 01, 2009 11:46 pm ] |
| Post subject: | |
ThunderbirdJunkie has a pair of new arms sitting on top of his toolbox. $50 each+shipping takes them |
|
| Author: | jerbacher [ Mon Jul 06, 2009 9:05 am ] |
| Post subject: | |
Ray, Sorry I couldnt help you out with this man. If you remember, the boot on mine got all torn up when we tried to take it off with your dad's ball joint tool thingy! |
|
| Author: | RAYMAN975 [ Mon Jul 06, 2009 12:08 pm ] |
| Post subject: | |
yea i remember that now.... "oh were taking it off and wont use it again, who cares if the boot gets ripped" lol i just ordered a set of als arms 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|