It is currently Fri Apr 26, 2024 1:46 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 165 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 9  Next
Author Message
 Post subject: Re: Needing help with install
PostPosted: Fri Jan 22, 2010 3:47 pm 
Offline
LOST Member

Joined: Sun Dec 27, 2009 11:02 am
Posts: 374
Can I get 265/75 16's on?


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Fri Jan 22, 2010 4:31 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Here we go again :roll:

You ask what you can put on the stock rims

265-75s Yes you can but.................. :twisted: :banghead:

but I tell you what just wait until the meet and greet and see what you want. 265-75s can be done but you really need to regear to 4.10s, thats about another 1000 with parts and labor, so depends on what you want to do

Read lots in the tire section
You know I NEVER asked one question UNTIL I had read through everything that was on here since most but not all was already answered.
Of course this was back in 04 when there wasn't as much information, but still

Just saying, not to be a jerk, but all of the information is on here, without asking and people repeating, repeating, repeating, repeating, repeating, repeating, its like what lift is best, if I had a quarter for every time I have answered that question let alone everyone else I myself could be retired in Tanzania and right now be in bed sleeping soundly with my wife! :BANANA: :BANANA: :pepper: :pepper: :pepper:

Not getting on your case trobow but it seems anymore that this is happening more and more
but think of this site as a Library
used to be people walked inside and looked things up in the Library
now adays all some people want to do is stand outside the Library doors and ask those of us who have went inside and used the Library and contributed to it

OK RANT OVER NOW

I feel better :goink: :goink:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Last edited by tommudd on Fri Jan 22, 2010 4:41 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Fri Jan 22, 2010 4:38 pm 
Offline
LOST Member

Joined: Sun Dec 27, 2009 11:02 am
Posts: 374
Sorry Tom. I couldn't find an exact answer. I will just check some things out tomorrow.


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Fri Jan 22, 2010 4:43 pm 
Offline
LOST Member

Joined: Sun Dec 27, 2009 11:02 am
Posts: 374
All in all, I am ancy to get the lift on (alone or with help). I need to focus on getting that installed first. Then worry about tires.


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Fri Jan 22, 2010 6:46 pm 
Offline
LOST Junkie

Joined: Sun May 04, 2008 9:04 pm
Posts: 768
Location: FU
Trobow, I have a set of 5 (BFG 265/70/16 Rugged trail T/A) tire's that would work fine !! I need to get them out of my garage, they have about 75% tread left, only had them on for a year 1/2 !! prob. would want $275.00 for all 5 !!! :JEEPIN: :JEEPIN: :JEEPIN:

Tom, are you ok ?? Just breath Man !!! :mrgreen: :mrgreen: :mrgreen:

_________________
96 XJ with a lot of crap !!
04 KJ with some crap!!
15 Forester XT
14 STI Wagon
75 Cutlass "S"


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Fri Jan 22, 2010 6:52 pm 
Offline
LOST Member

Joined: Sun Dec 27, 2009 11:02 am
Posts: 374
I think I was a little pushy.......for the FNG


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Fri Jan 22, 2010 9:20 pm 
Offline
LOST Addict
User avatar

Joined: Thu Feb 05, 2009 6:15 pm
Posts: 1244
Location: SARANAC, MI
WOW tom laid the SMACK DOWN!!! you shur are hard on those OHIO boys. But I guess that is what it takes to get a well oiled lost chapter like you guys have. Don't worry with some guidance michigan will be right there.................................................................................................................................................................................................................Someday :banghead:

_________________
SOLD!!!
2005 Liberty Renegade
STT CustomSTUFF
4" Stump Lift.
JBA UCA's
245/75/16 GOODYEAR DURA TRACS


Thanks for throwing me under the bus Evil... Just remember this when you decide to turn yours back in to a... Real Jeep.


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Sat Jan 23, 2010 12:44 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
1996xj wrote:
Trobow, I have a set of 5 (BFG 265/70/16 Rugged trail T/A) tire's that would work fine !! I need to get them out of my garage, they have about 75% tread left, only had them on for a year 1/2 !! prob. would want $275.00 for all 5 !!! :JEEPIN: :JEEPIN: :JEEPIN:

Tom, are you ok ?? Just breath Man !!! :mrgreen: :mrgreen: :mrgreen:


Not going to say another word :grim: :grim: :grim: :dead:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Sat Jan 23, 2010 6:36 am 
Offline
LOST Member

Joined: Sun Dec 27, 2009 11:02 am
Posts: 374
<-----patience, patience, patience


:ALONE:


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Sat Jan 23, 2010 10:44 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
trobow

only a few more hours then you can see how I think Black KJ should look, well one that has some changes coming !

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Tue Jan 26, 2010 9:15 am 
Offline
LOST Member

Joined: Sun Dec 27, 2009 11:02 am
Posts: 374
RSX 17505's x2 -------CHECK!
RSX 17004's x2
OME 927's x2-------CHECK!
OME 948's x2
Boiler's front shims x2-------CHECK!
Teraflex Bumpstops x2--------CHECK!
Pucks x4
Rear Iso's x 2 (or 4)
Conduit nuts x6
A-Arms x2


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Tue Jan 26, 2010 10:10 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Getting there

Isn't waiting for parts fun!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Tue Jan 26, 2010 12:18 pm 
Offline
LOST Member

Joined: Sun Dec 27, 2009 11:02 am
Posts: 374
Being patient is hard.....but after this past weekend, I know it will pay off.


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Tue Jan 26, 2010 2:12 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Feb 07, 2009 3:58 pm
Posts: 645
Location: Fort Wayne, Indiana
tommudd wrote:
Getting there

Isn't waiting for parts fun!


It's fun, but then after you get them, on cycle starts all over again......I feel like I need a 12 step program........

Jeep Anonamous

Hello my name is John and I have a Jeep Problem :dizzy:

_________________
Apatosaurus, Jurassic Park Edition


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Tue Jan 26, 2010 2:52 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
yodejt02 wrote:
tommudd wrote:
Getting there

Isn't waiting for parts fun!


It's fun, but then after you get them, on cycle starts all over again......I feel like I need a 12 step program........

Jeep Anonamous

Hello my name is John and I have a Jeep Problem :dizzy:


Wait until you have had the same "problem" for over 38 years.

There is no cure
Remember I bought the Liberty so I would not be tempted to do anything to it.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Tue Jan 26, 2010 5:21 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Feb 07, 2009 3:58 pm
Posts: 645
Location: Fort Wayne, Indiana
did not know that Tom....... :ROTFL:

I guess your right........good thing my wife doesn't care too much :rockon:

_________________
Apatosaurus, Jurassic Park Edition


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Wed Jan 27, 2010 12:36 am 
Offline
LOST Addict
User avatar

Joined: Thu Feb 05, 2009 6:15 pm
Posts: 1244
Location: SARANAC, MI
That's why I married someone that buys me jeep parts :BANANA: :pepper: :BANANA: :pepper:

_________________
SOLD!!!
2005 Liberty Renegade
STT CustomSTUFF
4" Stump Lift.
JBA UCA's
245/75/16 GOODYEAR DURA TRACS


Thanks for throwing me under the bus Evil... Just remember this when you decide to turn yours back in to a... Real Jeep.


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Wed Jan 27, 2010 1:15 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
stumpjumper_09 wrote:
That's why I married someone that buys me jeep parts :BANANA: :pepper: :BANANA: :pepper:



Go away we don't like you any longer !! :twisted:
:-)r :-)r


My first wife bought Jeep parts,
second one didn't ,
third one did ,
this one doesn't care as long as it gets her where she is going and they both look good going down the road

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Wed Jan 27, 2010 2:18 pm 
Offline
LOST Member

Joined: Sun Dec 27, 2009 11:02 am
Posts: 374
RSX 17505's x2 -------CHECK!
RSX 17004's x2 -------CHECK!
OME 927's x2-------CHECK!
OME 948's x2
Boiler's front shims x2-------CHECK!
Teraflex Bumpstops x2--------CHECK!
Pucks x4
Rear Iso's x 2 (or 4)
Conduit nuts x6
A-Arms x2

GY Wrangler Dura-Trac's x5 245/75/16 = $1018? Does that sound right?


Top
 Profile  
 
 Post subject: Re: Needing help with install
PostPosted: Wed Jan 27, 2010 3:38 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
4) 265-75-16 Goodyear Duratracs mounted , balanced, all taxes out the door in twenty minutes, 701.16 at Tireman, someone said they went up recently but ????
I went in with a Goodyear Authority from Walmart , and also quotes from TireRack etc , told them what I wanted and I could either buy from them or go down the street. It took him 15 minutes to get to my price, but I got my tires there. :wink:

Goodyear wanted 198.89 per tire plus all taxes etc. Funny thing is Tireman got them out of the Goodyear warehouse downtown , now who's making money?

Oh and end of the month is a great time to buy due to them trying to hit their quota

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 165 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 9  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com